Alle Werkstoffdatenblätter sind frei verfügbar. Kostenlose Registrierung unter www.materialdatacenter.com
Material Data Center ist ein weltweit führendes Informationssystem für Kunststoffe und bietet eine umfangreiche Kunststoffdatenbank, Berechnungsprogramme, CAE Schnittstellen, eine Literaturdatenbank und eine Bauteildatenbank. Für mehr Informationen über Material Data Center besuchen Sie www.materialdatacenter.com.
Dies ist das kostenlose Material Data Center Datenblatt für HOSTAFORM® C 2521 10/1570 - POM - Celanese
Material Data Center bietet Ihnen folgende Funktionalität für HOSTAFORM® C 2521 10/1570 an:
Einheitenkonvertierung, PDF Datenblattdruck, direkter Vergleich mit anderen Kunststoffen, Berechnung von Fliesslängen, Schnapphakenberechnung, Biegebalkenberechnung, Kühlzeitberechnung, Parameter für Werkstoffmodelle, CAE Schnittstellen
Einheitenkonvertierung, PDF Datenblattdruck, direkter Vergleich mit anderen Kunststoffen, Berechnung von Fliesslängen, Schnapphakenberechnung, Biegebalkenberechnung, Kühlzeitberechnung, Parameter für Werkstoffmodelle, CAE Schnittstellen
Hier finden Sie eine Übersicht über weitere Informationen, die Material Data Center zu Hostaform bietet.
Die folgenden Links führen Sie direkt zu den entsprechenden Daten in diesem Datenblatt:
Produkttext
Chemical abbreviation according to ISO 1043-1: POM
Molding compound ISO 29988-POM-K,,M-GCL,01-002
Stiff-flowing type for injection molding and extrusion with high impact toughness and good tracking resistance over a high range of temperature; UV-stabilized with carbon black, good chemical resistance to solvents, fuel and strong alkalis as well as good hydrolysis resistance; high resistance to thermal and oxidative degradation.
Ranges of applications: injection molding thick-walled, void-free molded parts; extrusion e.g. for boards and pipes, exterior applications.
Molding compound ISO 29988-POM-K,,M-GCL,01-002
Stiff-flowing type for injection molding and extrusion with high impact toughness and good tracking resistance over a high range of temperature; UV-stabilized with carbon black, good chemical resistance to solvents, fuel and strong alkalis as well as good hydrolysis resistance; high resistance to thermal and oxidative degradation.
Ranges of applications: injection molding thick-walled, void-free molded parts; extrusion e.g. for boards and pipes, exterior applications.
| Flammability @1.6mm nom. thickn. | HB | - |
| Flammability at thickness h (3 mm) | HB | UL recognition (h) |
| Verarbeitungs-/Physikal. Eigenschaften | Wert | Einheit | Prüfnorm | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ISO Daten | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Schmelzevolumenrate, MVR | 2.5 | cm³/10min | ISO 1133 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Temperatur | 190 | °C | - | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Belastung | 2.16 | kg | - | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Verarbeitungsschwindung, parallel | 2.1 | % | ISO 294-4, 2577 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Verarbeitungsschwindung, senkrecht | 1.8 | % | ISO 294-4, 2577 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Dichte der Schmelze | 1200 | kg/m³ | - | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Wärmeleitfähigkeit der Schmelze | 0.155 | W/(m K) | - | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Spez. Wärmekapazität der Schmelze | 2210 | J/(kg K) | - | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Ejection-Temperatur | 140 | °C | - | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Mechanische Eigenschaften | Wert | Einheit | Prüfnorm | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ISO Daten | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Zug-Modul | 2600 | MPa | ISO 527 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Streckspannung | 62 | MPa | ISO 527 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Streckdehnung | 9 | % | ISO 527 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Nominelle Bruchdehnung | 32 | % | ISO 527 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Charpy-Schlagzähigkeit, +23°C | 250 | kJ/m² | ISO 179/1eU | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Charpy-Schlagzähigkeit, -30°C | 250 | kJ/m² | ISO 179/1eU | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Charpy-Kerbschlagzähigkeit, +23°C | 8.5 | kJ/m² | ISO 179/1eA | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Charpy-Kerbschlagzähigkeit, -30°C | 7 | kJ/m² | ISO 179/1eA | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Thermische Eigenschaften | Wert | Einheit | Prüfnorm | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ISO Daten | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Schmelztemperatur, 10°C/min | 165 | °C | ISO 11357-1/-3 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Formbeständigkeitstemperatur, 1.80 MPa | 101 | °C | ISO 75-1/-2 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Längenausdehnungskoeffizient, parallel | 110 | E-6/K | ISO 11359-1/-2 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Brennbarkeit bei nominal 1.5mm | HB | class | IEC 60695-11-10 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| geprüfte Probekörperdicke | 1.5 | mm | - | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Brennbarkeit bei Dicke h | HB | class | IEC 60695-11-10 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| geprüfte Probekörperdicke | 3.0 | mm | - | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Yellow Card vorhanden | ja | - | - | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Elektrische Eigenschaften | Wert | Einheit | Prüfnorm | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ISO Daten | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Dielektrizitätszahl, 100Hz | 4 | - | IEC 62631-2-1 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Dielektrizitätszahl, 1MHz | 4 | - | IEC 62631-2-1 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Dielektr. Verlustfaktor, 100Hz | 15 | E-4 | IEC 62631-2-1 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Dielektr. Verlustfaktor, 1MHz | 50 | E-4 | IEC 62631-2-1 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Spezifischer Durchgangswiderstand | 1E12 | Ohm*m | IEC 62631-3-1 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Spezifischer Oberflächenwiderstand | 1E14 | Ohm | IEC 62631-3-2 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Elektrische Durchschlagfestigkeit | 35 | kV/mm | IEC 60243-1 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Andere Eigenschaften | Wert | Einheit | Prüfnorm |
| Wasseraufnahme | 0.65 | % | Ähnlich ISO 62 |
| Feuchtigkeitsaufnahme | 0.2 | % | Ähnlich ISO 62 |
| Dichte | 1410 | kg/m³ | ISO 1183 |
Merkmale
Verarbeitungsmethoden
Spritzgießen, Folienextrusion, Profilextrusion, Plattenextrusion, übrige Extrusion, Blasformen
Lieferformen
Granulat
Additive
Entformungshilfsmittel
Besondere Kennwerte
Stabilisiert/stabil Bewitterung
Merkmale
Copolymer
Weitere Informationen
Spritzgießen
General drying is not necessary due to low moisture absorption of
the resin.
In case of bad storage conditions (water contact or condensed water)
the use of a recirculating air dryer (100 to 120 °C / max. 40 mm
layer / 3 to 6 hours) is recommended.
Max. Water content 0,2 %
Standard injection moulding machines with three phase (15 to 25 D)
plasticating screws will fit.
Conditioning e.g. moisturizing is not necessary.
the resin.
In case of bad storage conditions (water contact or condensed water)
the use of a recirculating air dryer (100 to 120 °C / max. 40 mm
layer / 3 to 6 hours) is recommended.
Max. Water content 0,2 %
Standard injection moulding machines with three phase (15 to 25 D)
plasticating screws will fit.
Conditioning e.g. moisturizing is not necessary.
Folienextrusion
General drying is not necessary due to low moisture absorption of
the resin.
In case of bad storage conditions (water contact or condensed water)
the use of a recirculating air dryer (100 to 120 °C / max. 40 mm
layer / 3 to 6 hours) is recommended.
Max. Water content 0,2 %
Standard extruders with grooved feed zone and short compression
screws (minimum 25 D) will fit.
Melt temperature 180-190 °C
Conditioning e.g. moisturizing is not necessary.
In case of very thick wall thickness profiles after-annealing it is
recommended to reduce internal stress.
Annealing temperature 130-140 °C
Annealing time 10 min/mm thickness
the resin.
In case of bad storage conditions (water contact or condensed water)
the use of a recirculating air dryer (100 to 120 °C / max. 40 mm
layer / 3 to 6 hours) is recommended.
Max. Water content 0,2 %
Standard extruders with grooved feed zone and short compression
screws (minimum 25 D) will fit.
Melt temperature 180-190 °C
Conditioning e.g. moisturizing is not necessary.
In case of very thick wall thickness profiles after-annealing it is
recommended to reduce internal stress.
Annealing temperature 130-140 °C
Annealing time 10 min/mm thickness
Übrige Extrusion
General drying is not necessary due to low moisture absorption of
the resin.
In case of bad storage conditions (water contact or condensed water)
the use of a recirculating air dryer (100 to 120 °C / max. 40 mm
layer / 3 to 6 hours) is recommended.
Max. Water content 0,2 %
Standard extruders with grooved feed zone and short compression
screws (minimum 25 D) will fit.
Melt temperature 180-190 °C
Conditioning e.g. moisturizing is not necessary.
In case of very thick wall thickness profiles after-annealing it is
recommended to reduce internal stress.
Annealing temperature 130-140 °C
Annealing time 10 min/mm thickness
the resin.
In case of bad storage conditions (water contact or condensed water)
the use of a recirculating air dryer (100 to 120 °C / max. 40 mm
layer / 3 to 6 hours) is recommended.
Max. Water content 0,2 %
Standard extruders with grooved feed zone and short compression
screws (minimum 25 D) will fit.
Melt temperature 180-190 °C
Conditioning e.g. moisturizing is not necessary.
In case of very thick wall thickness profiles after-annealing it is
recommended to reduce internal stress.
Annealing temperature 130-140 °C
Annealing time 10 min/mm thickness
Profilextrusion
General drying is not necessary due to low moisture absorption of
the resin.
In case of bad storage conditions (water contact or condensed water)
the use of a recirculating air dryer (100 to 120 °C / max. 40 mm
layer / 3 to 6 hours) is recommended.
Max. Water content 0,2 %
Standard extruders with grooved feed zone and short compression
screws (minimum 25 D) will fit.
Melt temperature 180-190 °C
Conditioning e.g. moisturizing is not necessary.
In case of very thick wall thickness profiles after-annealing it is
recommended to reduce internal stress.
Annealing temperature 130-140 °C
Annealing time 10 min/mm thickness
the resin.
In case of bad storage conditions (water contact or condensed water)
the use of a recirculating air dryer (100 to 120 °C / max. 40 mm
layer / 3 to 6 hours) is recommended.
Max. Water content 0,2 %
Standard extruders with grooved feed zone and short compression
screws (minimum 25 D) will fit.
Melt temperature 180-190 °C
Conditioning e.g. moisturizing is not necessary.
In case of very thick wall thickness profiles after-annealing it is
recommended to reduce internal stress.
Annealing temperature 130-140 °C
Annealing time 10 min/mm thickness
Plattenextrusion
General drying is not necessary due to low moisture absorption of
the resin.
In case of bad storage conditions (water contact or condensed water)
the use of a recirculating air dryer (100 to 120 °C / max. 40 mm
layer / 3 to 6 hours) is recommended.
Max. Water content 0,2 %
Standard extruders with grooved feed zone and short compression
screws (minimum 25 D) will fit.
Melt temperature 180-190 °C
Conditioning e.g. moisturizing is not necessary.
In case of very thick wall thickness profiles after-annealing it is
recommended to reduce internal stress.
Annealing temperature 130-140 °C
Annealing time 10 min/mm thickness
the resin.
In case of bad storage conditions (water contact or condensed water)
the use of a recirculating air dryer (100 to 120 °C / max. 40 mm
layer / 3 to 6 hours) is recommended.
Max. Water content 0,2 %
Standard extruders with grooved feed zone and short compression
screws (minimum 25 D) will fit.
Melt temperature 180-190 °C
Conditioning e.g. moisturizing is not necessary.
In case of very thick wall thickness profiles after-annealing it is
recommended to reduce internal stress.
Annealing temperature 130-140 °C
Annealing time 10 min/mm thickness
Blasformen
General drying is not necessary due to low moisture absorption of
the resin.
In case of bad storage conditions (water contact or condensed water)
the use of a recirculating air dryer (100 to 120 °C / max. 40 mm
layer / 3 to 6 hours) is recommended.
Max. Water content 0,2 %
Standard extruders with plasticating screws (20 to 25 D) will fit.
Melt temperature 180-190 °C
Mould-surface temperature 60-100 °C
Conditioning e.g. moisturizing is not necessary.
the resin.
In case of bad storage conditions (water contact or condensed water)
the use of a recirculating air dryer (100 to 120 °C / max. 40 mm
layer / 3 to 6 hours) is recommended.
Max. Water content 0,2 %
Standard extruders with plasticating screws (20 to 25 D) will fit.
Melt temperature 180-190 °C
Mould-surface temperature 60-100 °C
Conditioning e.g. moisturizing is not necessary.
Haftungsausschluss
Copyright Altair Engineering GmbH. Die Altair Engineering GmbH übernimmt keine Haftung für die Fehlerfreiheit dieser Informationen. Der Einsatz der Daten erfolgt in der alleinigen Verantwortung des Nutzers unter Ausschluss jeglicher Haftung der Altair Engineering GmbH; dies gilt insbesondere für Ansprüche auf Ersatz von Folgeschäden. Es wird ausdrücklich darauf hingewiesen, dass jegliche Entscheidung über die Anwendung von Werkstoffen mit dem Produzenten des jeweiligen Materials abgesprochen werden muss. Dies bezieht sich auf alle Inhalte dieses Systems. Weiterhin sind die Hinweise zum Urheberrecht zu beachten.
Erstellt: Quelle: www.materialdatacenter.com
Material Data Center wird von M-Base Engineering + Software GmbH angeboten. M-Base Engineering + Software GmbH übernimmt keinerlei Gewährleistung, dass das System fehlerfrei ist. Jegliche Entscheidung über die Anwendung von Werkstoffen muss mit dem jeweiligen Produzenten einzeln abgeklärt werden.
Weiterführende Informationen zu diesem Material wie Stoffgruppe, Herstelleradresse, evtl. auch Datenblätter und Anwendungsbeispiele finden Sie auf www.materialdatacenter.com. Ein Teil der Informationen sind registrierten Nutzern vorbehalten. Auf der Startseite finden Sie einen Link zur kostenlosen Registrierung.