Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of AVALON® 95 AB - TPU - Huntsman Polymers Corp.

Material Data Center offers the following functions for AVALON® 95 AB:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Avalon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Mechanical properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Mechanical propertiesValueUnitTest Standard
ISO Data
Flexural modulus, 23°C 80 MPa ISO 178
Tensile Strength 35 MPa ISO 37
Strain at break 425 % ISO 37
Compression set at 23 °C, 24h 20 % ISO 815
Tear strength 146 kN/m ISO 34-1
Abrasion resistance 35 mm³ ISO 4649
Shore A hardness 95 - ISO 7619-1
Shore D hardness 50 - ISO 7619-1
Other propertiesValueUnitTest Standard
Density 1220 kg/m³ ISO 1183
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 80 - 90 °C -
Pre-drying - Time 2 h -
Mold temperature 25 - 50 °C -
Feed temperature 25 - 35 °C -
Zone 1 190 - 200 °C -
Zone 2 195 - 205 °C -
Zone 3 200 - 210 °C -
Nozzle temperature 185 - 195 °C -
Screw speed 20 - 80 rpm -
Injection pressure 2 - 10 MPa -
Back pressure 0.03 - 0.3 MPa -
Holding pressure 1 - 5 MPa -
Characteristics
Processing
Injection Molding
Features
Scratch Resistant
Chemical Resistance
Hydrolytically Stable
Applications
Sports Equipment
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.