Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of BMC RF 1600/20 - UP-(MD+GF)70 - Polynt S.p.A.

Material Data Center offers the following functions for BMC RF 1600/20:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other BMC datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Product Texts
Resistant. Negligible, reversible or no changes in mass and dimensions.

Please consider the information about the application of the materials.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Molding shrinkage, parallel 0.1 % ISO 294-4, 2577
Mechanical propertiesValueUnitTest Standard
ISO Data
Charpy impact strength, +23°C 30 kJ/m² ISO 179/1eU
Rockwell hardness M 80 - ISO 2039-2
Other Standards[S]
Flexural modulus, 23°C 10000 MPa ISO 14125A
Flexural strength 100 MPa ISO 14125A
S: These properties are reported by the producer according standards that are different to our defaults.
Thermal propertiesValueUnitTest Standard
ISO Data
Glow Wire Flammability Index (GWFI) 960 °C IEC 60695-2-12
Electrical propertiesValueUnitTest Standard
ISO Data
Volume resistivity 1E12 Ohm*m IEC 62631-3-1
Surface resistivity 1E14 Ohm IEC 62631-3-2
Comparative tracking index 600 - IEC 60112
ASTM Data
Arc Resistance 180 s ASTM D 495
Other propertiesValueUnitTest Standard
Water absorption 0.2 % Sim. to ISO 62
Density 1800 kg/m³ ISO 1183
Characteristics
Processing
Compression Molding
Delivery form
Bulk Molding Compound
Special Characteristics
Flame retardant, Halogen-free
Applications
Electrical and Electronical
Regional Availability
Europe
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.