Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of BALTAMID 6 GK 30 natur - PA6-GB30 - BALTIC Kunststoff Handels GmbH

Material Data Center offers the following functions for BALTAMID 6 GK 30 natur:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Baltamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ASTM Data
Mold Shrinkage, MD 0.011 mm/mm ASTM D 955
Mechanical propertiesdry / condUnitTest Standard
ISO Data
Izod impact strength, +23°C 30 / - kJ/m² ISO 180/1U
ASTM Data
Tensile Strength at Break 70 / 40 MPa ASTM D 638
Elongation at Break 8 / 12 % ASTM D 638
Flexural Modulus 4000 / 2500 MPa ASTM D 790
Rockwell Hardness R 120 / R 105 - ASTM D 785
Thermal propertiesValueUnitTest Standard
ISO Data
Glow Wire Flammability Index (GWFI) 650 °C IEC 60695-2-12
ASTM Data
UL 94 Flame rating HB - UL 94
Thickness tested 1.6 mm -
DTUL @ 66 psi 190 °C ASTM D 648
DTUL @ 264 psi 95 °C ASTM D 648
Melting Temperature 222 °C ASTM D 3418
Vicat Temperature 195 °C ASTM D 1525
Electrical propertiesdry / condUnitTest Standard
ASTM Data
Surface Resistivity * / 1E11 Ohm ASTM D 257
Volume Resistivity 1E15 / 1E11 Ohm*cm ASTM D 257
Other propertiesValueUnitTest Standard
Water Absorption, 24hr 0.9 % ASTM D 570
Density 1350 kg/m³ ASTM D 792
Characteristics
Delivery form
Natural Color
Regional Availability
Europe
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.