Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Bergaflex® BFI 30A-325 - TPS - Avient Corporation

Material Data Center offers the following functions for Bergaflex® BFI 30A-325:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Bergaflex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Mechanical properties - Other properties - Test specimen production
Any use of this information falls under the rules of our disclaimer.
Product Texts
Resistant. Negligible, reversible or no changes in mass and dimensions.

Please consider the information about the application of the materials.
Mechanical propertiesValueUnitTest Standard
ISO Data
Stress at 100% elongation 1.2 MPa ISO 527
Stress at 300% elongation 1.8 MPa ISO 527
Stress at break TPE 5.2 MPa ISO 527
Strain at break TPE >300 % ISO 527
Compression set at 23 °C, 24h 15 % ISO 815
Compression set at 70 °C, 24h 45 % ISO 815
Compression set at 100 °C, 24h 89 % ISO 815
Shore A hardness 30 - ISO 7619-1
Other propertiesValueUnitTest Standard
Density 880 kg/m³ ISO 1183
Test specimen productionValueUnitTest Standard
ISO Data
Injection Molding, melt temperature 170 °C ISO 294
Injection Molding, mold temperature 30 °C ISO 294
Characteristics
Processing
Injection Molding, Film Extrusion, Profile Extrusion, Other Extrusion, Blow Molding, Calandering
Delivery form
Pellets
Special Characteristics
U.V. stabilized or stable to weather
Regional Availability
Europe
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.