Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Clyrell EC340Q - PP - LyondellBasell Industries

Material Data Center offers the following functions for Clyrell EC340Q:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Clyrell datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Optical properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt flow index, MFI 22 g/10min ISO 1133
Temperature 230 °C -
Load 2.16 kg -
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 1150 MPa ISO 527
Yield stress 23 MPa ISO 527
Yield strain 13 % ISO 527
Strain at break >50 % ISO 527
Charpy notched impact strength, +23°C 22 kJ/m² ISO 179/1eA
Izod notched impact strength, +23°C 22 kJ/m² ISO 180/1A
Izod notched impact strength 4.3 kJ/m² ISO 180/1A
Temperature -20 °C -
Thermal propertiesValueUnitTest Standard
ISO Data
Temp. of deflection under load, 0.45 MPa 88 °C ISO 75-1/-2
Vicat softening temperature, A 127 °C ISO 306
Vicat softening temperature, B 58 °C ISO 306
Optical propertiesValueUnitTest Standard
ASTM Data
Gloss 100 - ASTM D 2457
Other propertiesValueUnitTest Standard
Density 900 kg/m³ ISO 1183
Characteristics
Processing
Injection Molding
Special Characteristics
High impact or impact modified
Features
Blush Resistance/Low Crease Whitening, Nucleated, Copolymer, Impact Copolymer
Certifications
Food contact, Food approval 1935/2004/EC, Food approval 10/2011, Food approval FDA 21 CFR
Applications
Packaging, Sports Equipment
Regional Availability
Europe, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.