Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Decal® 5431 - PF-X - Raschig GmbH

Material Data Center offers the following functions for Decal® 5431:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Decal datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Molding shrinkage, parallel 0.7 % ISO 294-4, 2577
Thermal conductivity of melt 0.3 W/(m K) -
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 5000 MPa ISO 527
Tensile Strength 60 MPa ISO 527
Flexural modulus, 23°C 7000 MPa ISO 178
Charpy impact strength, +23°C 7.5 kJ/m² ISO 179/1eU
Charpy notched impact strength, +23°C 3 kJ/m² ISO 179/1eA
Thermal propertiesValueUnitTest Standard
ISO Data
Temp. of deflection under load, 1.80 MPa 170 °C ISO 75-1/-2
Temp. of deflection under load, 8.00 MPa 110 °C ISO 75-1/-2
Coeff. of linear therm. expansion, parallel 30 E-6/K ISO 11359-1/-2
Burning behav. at thickness h V-0 class IEC 60695-11-10
Thickness tested 3.6 mm -
Electrical propertiesValueUnitTest Standard
ISO Data
Relative permittivity, 100Hz 14 - IEC 62631-2-1
Relative permittivity, 1MHz 5 - IEC 62631-2-1
Dissipation factor, 100Hz 7000 E-4 IEC 62631-2-1
Dissipation factor, 1MHz 700 E-4 IEC 62631-2-1
Volume resistivity >1E13 Ohm*m IEC 62631-3-1
Surface resistivity 1E14 Ohm IEC 62631-3-2
Electric strength 25 kV/mm IEC 60243-1
Comparative tracking index 175 - IEC 60112
ASTM Data
Arc Resistance 6 s ASTM D 495
Other propertiesValueUnitTest Standard
Water absorption 1.5 % Sim. to ISO 62
Density 1400 kg/m³ ISO 1183
Bulk density 625 kg/m³ -
Characteristics
Processing
Injection Molding, Compression Molding
Delivery form
Pellets, Black
Regional Availability
North America, Europe
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.