Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Durabio™ D7340 - PC - Mitsubishi Chemical Performance Polymers

Material Data Center offers the following functions for Durabio™ D7340:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Durabio datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Optical properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt volume-flow rate, MVR 8 cm³/10min ISO 1133
Temperature 230 °C -
Load 2.16 kg -
Melt flow index, MFI 10 g/10min ISO 1133
Temperature 230 °C -
Load 2.16 kg -
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 2700 MPa ISO 527
Tensile Strength 79 MPa ISO 527
Strain at break 72 % ISO 527
Flexural modulus, 23°C 2700 MPa ISO 178
Flexural strength 116 MPa ISO 178
Charpy impact strength, +23°C N kJ/m² ISO 179/1eU
Charpy notched impact strength, +23°C 7 kJ/m² ISO 179/1eA
Thermal propertiesValueUnitTest Standard
ISO Data
Temp. of deflection under load, 1.80 MPa 102 °C ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa 114 °C ISO 75-1/-2
Coeff. of linear therm. expansion, parallel 69 E-6/K ISO 11359-1/-2
Coeff. of linear therm. expansion, normal 69 E-6/K ISO 11359-1/-2
Optical propertiesValueUnitTest Standard
ISO Data
Luminous transmittance 92 % ISO 13468-1, -2
Other propertiesValueUnitTest Standard
Density 1360 kg/m³ ISO 1183
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 90 - 100 °C -
Pre-drying - Time 5 - 7 h -
Melt temperature 230 - 250 °C -
Mold temperature 60 - 80 °C -
Feed temperature 220 - 260 °C -
Zone 1 220 - 260 °C -
Nozzle temperature 220 - 260 °C -
Screw speed 50 rpm -
Injection pressure 50 - 95 MPa -
Back pressure 10 MPa -
Characteristics
Processing
Injection Molding
Delivery form
Black
Special Characteristics
Heat stabilized or stable to heat, Transparent
Features
Light Guiding
Certifications
Contains renewable resources
Applications
Automotive, Electrical and Electronical, Packaging, Sports Equipment
Regional Availability
North America, Europe, Asia Pacific
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.