Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ecdel™ 9966 - Copolyester - Eastman Chemical Co.

Material Data Center offers the following functions for Ecdel™ 9966:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ecdel datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Optical properties - Other properties - Film Properties
Any use of this information falls under the rules of our disclaimer.
Product Texts

Ecdel™ 9966 elastomer meets ISO 10993 and/or USP Class VI biocompatibility requirement.

Ecdel elastomers are plasticizer free copolyester elastomers (COPE) that offer clarity, toughness, flexibility, and chemical resistance needed in a variety of flexible packaging including flexible medical and pharmaceutical packaging applications. Ecdel elastomers are radiation, electron beam, ethylene oxide, and autoclave sterilization stable. Ecdel 9966 may be injection molded or extruded. Ecdel elastomers may be extrusion blow molded directly into bags or extruded into film for later fabrication into bags. Ecdel 9966's medium inherent viscosity makes it a

good general purpose elastomer.




Processing/Physical CharacteristicsValueUnitTest Standard
ASTM Data
Melt Flow Index, MFI 18 g/10min ASTM D 1238
Temperature 230 °C -
Load 2.16 kg -
Mechanical propertiesValueUnitTest Standard
ASTM Data
Tensile Modulus 170 MPa ASTM D 638
Tensile Strength at Yield 14 MPa ASTM D 638
Tensile Strength at Break 22 MPa ASTM D 638
Elongation at Yield 38 % ASTM D 638
Elongation at Break 400 % ASTM D 638
Flexural Modulus 150 MPa ASTM D 790
Shore A Hardness 95 - ASTM D 2240
Shore D Hardness 55 - ASTM D 2240
Izod Impact notched, Low-Temperature 40 J/m ASTM D 256
Temperature -40 °C -
Thermal propertiesValueUnitTest Standard
ASTM Data
Coefficient of Thermal Expansion, MD 150 E-6/K ASTM D 696
Melting Temperature 205 °C ASTM D 3418
Glass Transition Temperature -40 °C ASTM E 1356
Vicat Temperature 170 °C ASTM D 1525
Thermal Conductivity, solid state 0.0274 W/(m K) ASTM C 177
Electrical propertiesValueUnitTest Standard
ASTM Data
Dielectric Strength, Short Time 14 kV/mm ASTM D 149
Dissipation Factor, 1 MHz 0.02 - ASTM D 150
Dielectric Constant, 1 MHz 3.7 - ASTM D 150
Surface Resistivity 1E15 Ohm ASTM D 257
Volume Resistivity 1E14 Ohm*cm ASTM D 257
Optical propertiesValueUnitTest Standard
ASTM Data
Gloss 85 - ASTM D 2457
Haze 1 % ASTM D 1003
Light Transmittance 93 % ASTM D 1003
Index of Refraction 1.51 - ASTM D 542
Other propertiesValueUnitTest Standard
Water Absorption, 24hr 0.4 % ASTM D 570
Density 1130 kg/m³ ASTM D 792
Film PropertiesValueUnitTest Standard
ASTM Data
Tensile Modulus, MD 180 MPa ASTM D 882
Tensile Strength at Yield, MD 14 MPa ASTM D 882
Tensile Strength at Yield, TD 12 MPa ASTM D 882
Elongation at Break, MD 400 % ASTM D 882
Elongation at Break, TD 500 % ASTM D 882
Thickness of specimen 0.125 mm -
Characteristics
Processing
Injection Molding, Film Extrusion, Pipe/Tube Extrusion, Blow Molding
Special Characteristics
Heat stabilized or stable to heat, Transparent, Sterilizable, Ethylene Oxide (EtO) Sterilization, Steam sterilization, Gamma irradiation sterilization, Electron beam (e-beam) sterilization
Features
Copolymer
Chemical Resistance
General Chemical Resistance, Radiation Resistance
Certifications
Medical Grade, Biocompatibility ISO 10993, US Pharmacopeia Class VI Approved
Applications
General Purpose, Medical, Packaging
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.