Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Elastollan® soft 45AP - (TPU-ARES) - BASF Polyurethanes GmbH

Material Data Center offers the following functions for Elastollan® soft 45AP:
unit conversion, PDF datasheet print, comparison with other plastics, parameters for material models, CAE Interfaces

Check here, which other Elastollan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Mechanical properties - Other properties - Diagrams
Any use of this information falls under the rules of our disclaimer.
Product Texts
DESCRIPTION
Elastollan soft 45 AP is a polyester based TPU

SPECIAL PROPERTIES
excellent mechanical properties and wear resistance, good
damping characteristics and a high resilience performance, plasticized
Processable by injection moulding

TYPICAL APPLICATIONS
shoe application

OTHER HINTS
predrying: 3h at 75°C dehumidified air dryer,
max. content of humidity before processing: 0,02%
annealing: 20 h at 100°C in order to get optimum properties

CHEMICAL RESISTANCE
For detailed information on the chemical resistance of our
materials refer to this list of chemical resistance
Mechanical propertiesValueUnitTest Standard
ISO Data
Stress at break TPE 34 MPa ISO 527
Strain at break TPE >300 % ISO 527
Tear strength 42 kN/m ISO 34-1
Abrasion resistance 39 mm³ ISO 4649
Shore A hardness 50 - ISO 7619-1
Other propertiesValueUnitTest Standard
Density 1180 kg/m³ ISO 1183
Diagrams
Viscosity-shear rate , Elastollan® soft 45AP, (TPU-ARES), BASF PU
Shearstress-shear rate , Elastollan® soft 45AP, (TPU-ARES), BASF PU
Characteristics
Processing
Injection Molding
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Other text information
Injection molding
Barrel temperature : 180 - 200 °C
Melt temperature : 190 °C
Mold temperature: 25 - 45 °C
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.