Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of EMERGE™ PC 8702-5 - PC-GX20 - Trinseo

Material Data Center offers the following functions for EMERGE™ PC 8702-5:
unit conversion, PDF datasheet print, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Emerge datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt flow index, MFI 5 g/10min ISO 1133
Temperature 300 °C -
Load 1.2 kg -
Molding shrinkage, parallel 0.3 % ISO 294-4, 2577
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 6000 MPa ISO 527
Yield stress 100 MPa ISO 527
Stress at break 90 MPa ISO 527
Strain at break 4 % ISO 527
Flexural modulus, 23°C 5500 MPa ISO 178
Charpy notched impact strength, +23°C 8.5 kJ/m² ISO 179/1eA
Izod notched impact strength, +23°C 8 kJ/m² ISO 180/1A
Thermal propertiesValueUnitTest Standard
ISO Data
Temp. of deflection under load, 1.80 MPa 140 °C ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa 145 °C ISO 75-1/-2
Vicat softening temperature, B 150 °C ISO 306
Coeff. of linear therm. expansion, parallel 25 E-6/K ISO 11359-1/-2
Coeff. of linear therm. expansion, normal 52 E-6/K ISO 11359-1/-2
Burning behav. at 1.5 mm nom. thickn. V-0 class IEC 60695-11-10
Thickness tested 1.5 mm -
Burning behav. at thickness h V-2 class IEC 60695-11-10
Thickness tested 0.8 mm -
Burning behav. 5V at thickness h 5VA class IEC 60695-11-20
Thickness tested 3.0 mm -
Oxygen index 35 % ISO 4589-1/-2
Electrical propertiesValueUnitTest Standard
ISO Data
Relative permittivity, 1MHz 3.1 - IEC 62631-2-1
Dissipation factor, 100Hz 25 E-4 IEC 62631-2-1
Dissipation factor, 1MHz 160 E-4 IEC 62631-2-1
Volume resistivity >1E13 Ohm*m IEC 62631-3-1
Surface resistivity 3E14 Ohm IEC 62631-3-2
Electric strength 27 kV/mm IEC 60243-1
Other propertiesValueUnitTest Standard
Density 1330 kg/m³ ISO 1183
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 120 °C -
Pre-drying - Time 3 - 4 h -
Melt temperature 290 - 320 °C -
Mold temperature 80 - 120 °C -
Characteristics
Processing
Injection Molding
Additives
Release agent
Special Characteristics
Flame retardant, Phosphorus-free
Applications
IT / Business Machine, Electrical and Electronical
Regional Availability
Europe, Asia Pacific, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.