Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of EPIMIX PBT NC Q101 - PBT - Epsan Plastik San. Tic. A.Ş

Material Data Center offers the following functions for EPIMIX PBT NC Q101:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Epimix datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt flow index, MFI 25 g/10min ISO 1133
Temperature 240 °C -
Load 2.16 kg -
Molding shrinkage, parallel 1.8 % ISO 294-4, 2577
Molding shrinkage, normal 2.0 % ISO 294-4, 2577
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 2900 MPa ISO 527
Stress at break 60 MPa ISO 527
Strain at break 15 % ISO 527
Flexural modulus, 23°C 2550 MPa ISO 178
Charpy notched impact strength, +23°C 6 kJ/m² ISO 179/1eA
Izod notched impact strength, +23°C 5 kJ/m² ISO 180/1A
Thermal propertiesValueUnitTest Standard
ISO Data
Melting temperature, 10°C/min 220 °C ISO 11357-1/-3
Temp. of deflection under load, 1.80 MPa 55 °C ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa 165 °C ISO 75-1/-2
Vicat softening temperature, B 190 °C ISO 306
Burning behav. at 1.5 mm nom. thickn. HB class IEC 60695-11-10
Thickness tested 1.6 mm -
ASTM Data
UL 94 Flame rating HB - UL 94
Thickness tested 1.6 mm -
Other propertiesValueUnitTest Standard
Density 1310 kg/m³ ISO 1183
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 80 °C -
Pre-drying - Time 2 - 4 h -
Melt temperature 260 °C -
Characteristics
Processing
Injection Molding
Delivery form
Natural Color
Additives
Lubricants
Special Characteristics
Heat stabilized or stable to heat
Applications
General Purpose
Regional Availability
Europe
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.