Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Evoprene® G 936 - TPE - Alphagary

Material Data Center offers the following functions for Evoprene® G 936:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Evoprene datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Mechanical properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Strength 1.8 MPa ISO 37
Strain at break 550 % ISO 37
Compression set at 70 °C, 24h 33 % ISO 815
Compression set at 100 °C, 24h 75 % ISO 815
Shore A hardness 12 - ISO 7619-1
Other Standards[S]
Stress at 100% elongation 0.3 MPa ISO 37
Stress at 300% elongation 1.8 MPa ISO 37
Tear strength 9 kN/m ISO 6383
S: These properties are reported by the producer according standards that are different to our defaults.
Other propertiesValueUnitTest Standard
Other Standards[S]
Density 900 kg/m³ ISO 2781
S: These properties are reported by the producer according standards that are different to our defaults.
Characteristics
Processing
Injection Molding
Regional Availability
North America, Europe
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.