Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Fiberfil® J-60/15/MI/20 - PP-(GF+P)35 - LyondellBasell Industries

Material Data Center offers the following functions for Fiberfil® J-60/15/MI/20:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Fiberfil datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ASTM Data
Mold Shrinkage, MD 0.025 mm/mm ASTM D 955
Mechanical propertiesValueUnitTest Standard
ISO Data
Yield stress 41 MPa ISO 527
Yield strain 2.5 % ISO 527
Flexural modulus, 23°C 5000 MPa ISO 178
Flexural strength 60 MPa ISO 178
Izod notched impact strength, +23°C 3.2 kJ/m² ISO 180/1A
Thermal propertiesValueUnitTest Standard
ISO Data
Temp. of deflection under load, 1.80 MPa 146 °C ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa 154 °C ISO 75-1/-2
Other propertiesValueUnitTest Standard
Water Absorption, 24hr 0.04 % ASTM D 570
Density 1180 kg/m³ ASTM D 792
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 77 °C -
Pre-drying - Time 2 h -
Processing humidity ≤0.2 % -
Melt temperature 199 - 232 °C -
Mold temperature 32 - 71 °C -
Zone 1 199 - 210 °C -
Zone 2 204 - 227 °C -
Zone 3 182 - 199 °C -
Nozzle temperature 182 - 193 °C -
Back pressure 0 - 0.689 MPa -
Characteristics
Processing
Injection Molding
Delivery form
Pellets
Features
Homopolymer
Regional Availability
North America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.