Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of FLEXIRENE® MS 20 A - (PE-LLD) - Versalis S.p.A

Check here, which other Flexirene datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties - Diagrams

Any use of this information falls under the rules of our disclaimer.

Product Texts

Linear low density polyethylene with antioxidants.Suitable for injection moulding process.
Flexirene MS 20 A is characterised by otpimum low temperatures properties.

Applications
Detergent containers, stoppers and closures for chemicals, containers for low temperature use.
Its high flowability makes it ideal for masterbatches preparation for LLDPE and LDPE.

Processing/Physical Characteristics	Value	Unit	Test Standard
ISO Data
Melt volume-flow rate, MVR	26	cm³/10min	ISO 1133
Temperature	190	°C	-
Load	2.16	kg	-
Density of melt	746	kg/m³	-
Thermal conductivity of melt	0.39	W/(m K)	-
Spec. heat capacity of melt	2810	J/(kg K)	-
Ejection temperature	83	°C	-

Mechanical properties	Value	Unit	Test Standard
ISO Data
Tensile Modulus	150	MPa	ISO 527
Stress at 50% strain	10	MPa	ISO 527
Strain at break	>50	%	ISO 527
Shore D hardness	48	-	ISO 7619-1

Thermal properties	Value	Unit	Test Standard
ISO Data
Melting temperature, 10°C/min	113	°C	ISO 11357-1/-3
Glass transition temperature, 10°C/min	101	°C	ISO 11357-1/-2
Coeff. of linear therm. expansion, parallel	152	E-6/K	ISO 11359-1/-2

Other properties	Value	Unit	Test Standard
Density	921	kg/m³	ISO 1183

Diagrams

Characteristics

Processing

Injection Molding

Delivery form

Pellets

Regional Availability

North America, Europe, Asia Pacific, South and Central America, Near East/Africa

Other text information

Injection molding

#2

Typical processing temperature range:

    Melt temperature         160 - 210 °C

    Mold temperature          10-  40  °C

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.