Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Flomat 515/20 - UP-GF20 - Devi Polymers Private Limited

Material Data Center offers the following functions for Flomat 515/20:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Flomat datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
Other Standards[S]
Molding shrinkage, parallel 0.2 % BS-2782
S: These properties are reported by the producer according standards that are different to our defaults.
Mechanical propertiesValueUnitTest Standard
Other Standards[S]
Tensile Strength 49 MPa BS-2782
Flexural strength 127 MPa BS-2782
Compressive Strength 147 MPa BS-2782
S: These properties are reported by the producer according standards that are different to our defaults.
Thermal propertiesValueUnitTest Standard
ASTM Data
UL 94 Flame rating V-0 - UL 94
Electrical propertiesValueUnitTest Standard
ASTM Data
Arc Resistance 180 s ASTM D 495
Other Standards[S]
Volume resistivity 1E11 Ohm*m DIN 53482
Surface resistivity 1E12 Ohm DIN 53482
Electric strength 10 kV/mm BS 2782
S: These properties are reported by the producer according standards that are different to our defaults.
Other propertiesValueUnitTest Standard
Other Standards[S]
Water absorption 0.2 % BS-2782
Density 1800 kg/m³ BS-2782
S: These properties are reported by the producer according standards that are different to our defaults.
Characteristics
Processing
Compression Molding
Delivery form
Sheet Molding Compound
Regional Availability
Asia Pacific
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.