Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of FORMPOLY N46GF15 - PA46-GF15 - Formulated Polymers Limited

Material Data Center offers the following functions for FORMPOLY N46GF15:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Formpoly datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Mechanical properties - Thermal properties - Electrical properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Mechanical propertiesValueUnitTest Standard
ASTM Data
Tensile Modulus 6000 MPa ASTM D 638
Tensile Strength 140 MPa ASTM D 638
Elongation at Break 4 % ASTM D 638
Flexural Modulus 5600 MPa ASTM D 790
Izod Impact notched, 1/8 in 49.1 J/m ASTM D 256
Thermal propertiesValueUnitTest Standard
ASTM Data
DTUL @ 264 psi 270 °C ASTM D 648
Electrical propertiesValueUnitTest Standard
ASTM Data
Volume Resistivity 1E14 Ohm*cm ASTM D 257
Other propertiesValueUnitTest Standard
Density 1290 kg/m³ ASTM D 792
Characteristics
Delivery form
Pellets
Special Characteristics
Heat stabilized or stable to heat
Features
Fatigue Resistance, Low Odor
Chemical Resistance
General Chemical Resistance
Applications
Automotive, Electrical and Electronical
Regional Availability
Asia Pacific
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.