Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ISORYL® A 20 10 GF30 W - PPO-GF30 - Sirmax S.p.A.

Material Data Center offers the following functions for ISORYL® A 20 10 GF30 W:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Isoryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Molding shrinkage, parallel 0.2 % ISO 294-4, 2577
Mechanical propertiesValueUnitTest Standard
ISO Data
Stress at break 105 MPa ISO 527
Strain at break 2 % ISO 527
Flexural modulus, 23°C 6000 MPa ISO 178
Flexural strength 120 MPa ISO 178
Charpy notched impact strength, +23°C 3 kJ/m² ISO 179/1eA
Izod notched impact strength, +23°C 3 kJ/m² ISO 180/1A
Thermal propertiesValueUnitTest Standard
ISO Data
Temp. of deflection under load, 1.80 MPa 135 °C ISO 75-1/-2
Vicat softening temperature, B 145 °C ISO 306
Burning behav. at thickness h HB class IEC 60695-11-10
Thickness tested 3.0 mm -
Other propertiesValueUnitTest Standard
Density 1270 kg/m³ ISO 1183
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 80 - 100 °C -
Pre-drying - Time 3 h -
Melt temperature 280 - 310 °C -
Mold temperature 80 - 100 °C -
Characteristics
Processing
Injection Molding
Certifications
Drinking water contact, RoHS compliant
Applications
Electrical and Electronical
Regional Availability
North America, Europe, Asia Pacific, South and Central America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.