Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of KEPITAL® F30-51 - POM - Korea Engineering Plastics Co. Ltd.

Material Data Center offers the following functions for KEPITAL® F30-51:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Kepital datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt flow index, MFI 25 g/10min ISO 1133
Molding shrinkage, parallel 2.0 % ISO 294-4, 2577
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Strength 59 MPa ISO 527
Yield strain 8 % ISO 527
Strain at break 35 % ISO 527
Flexural modulus, 23°C 2650 MPa ISO 178
Charpy notched impact strength, +23°C 7 kJ/m² ISO 179/1eA
Thermal propertiesValueUnitTest Standard
ISO Data
Melting temperature, 10°C/min 165 °C ISO 11357-1/-3
Temp. of deflection under load, 1.80 MPa 92 °C ISO 75-1/-2
Coeff. of linear therm. expansion, parallel 130 E-6/K ISO 11359-1/-2
Burning behav. at thickness h HB class IEC 60695-11-10
Electrical propertiesValueUnitTest Standard
ISO Data
Surface resistivity >1E15 Ohm IEC 62631-3-2
Electric strength 19 kV/mm IEC 60243-1
Other propertiesValueUnitTest Standard
Humidity absorption 0.2 % Sim. to ISO 62
Density 1410 kg/m³ ISO 1183
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 80 - 100 °C -
Pre-drying - Time 3 - 4 h -
Processing humidity ≤0.1 % -
Mold temperature 60 - 80 °C -
Feed temperature 60 - 80 °C -
Zone 1 170 - 180 °C -
Zone 2 180 - 190 °C -
Zone 3 190 - 200 °C -
Nozzle temperature 180 - 210 °C -
Back pressure 2 MPa -
Characteristics
Delivery form
Black
Special Characteristics
U.V. stabilized or stable to weather
Features
Copolymer
Regional Availability
North America, Europe, Asia Pacific
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.