Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LAPEROS™ S475 - LCP-(MD+GF)30 - Polyplastics

Material Data Center offers the following functions for LAPEROS™ S475:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Laperos datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Mechanical properties - Thermal properties - Electrical properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Mechanical propertiesValueUnitTest Standard
ISO Data
Flexural modulus, 23°C 12500 MPa ISO 178
Flexural strength 180 MPa ISO 178
Charpy notched impact strength, +23°C 4 kJ/m² ISO 179/1eA
Rockwell hardness M 90 - ISO 2039-2
ASTM Data
Tensile Strength 140 MPa ASTM D 638
Thermal propertiesValueUnitTest Standard
ISO Data
Temp. of deflection under load, 1.80 MPa 305 °C ISO 75-1/-2
Burning behav. at thickness h V-0 class IEC 60695-11-10
Yellow Card available yes - -
Electrical propertiesValueUnitTest Standard
ISO Data
Relative permittivity, 1MHz 3.7 - IEC 62631-2-1
Dissipation factor, 1MHz 100 E-4 IEC 62631-2-1
Volume resistivity 2E14 Ohm*m IEC 62631-3-1
Electric strength 40 kV/mm IEC 60243-1
Comparative tracking index 150 - IEC 60112
ASTM Data
Arc Resistance 100 s ASTM D 495
Other propertiesValueUnitTest Standard
Density 1650 kg/m³ ISO 1183
Characteristics
Special Characteristics
Flame retardant, Heat stabilized or stable to heat
Features
Low Warpage
Regional Availability
Asia Pacific
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.