Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEONA™ TR382 - PA66 - Asahi Kasei

Material Data Center offers the following functions for LEONA™ TR382:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Leona datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Mechanical properties - Thermal properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Mechanical propertiesdry / condUnitTest Standard
ISO Data
Tensile Modulus 1900 / 700 MPa ISO 527
Yield stress * / 35 MPa ISO 527
Yield strain * / 28 % ISO 527
Stress at 50% strain 45 / * MPa ISO 527
Strain at break >50 / * % ISO 527
Flexural modulus, 23°C 2000 / 700 MPa ISO 178
Flexural strength 73 / 30 MPa ISO 178
Charpy impact strength, +23°C N / N kJ/m² ISO 179/1eU
Charpy notched impact strength, +23°C 80 / N kJ/m² ISO 179/1eA
Rockwell hardness R 107 - ISO 2039-2
ASTM Data
Tensile Strength 54 / 37 MPa ASTM D 638
Elongation at Break 70 / 220 % ASTM D 638
Flexural Modulus 2000 / 1000 MPa ASTM D 790
Flexural Strength 79 / 39 MPa ASTM D 790
Rockwell Hardness R 107 / R 89 - ASTM D 785
Taber Abrasion Resistance 6 mg/1000 cycles ASTM D 1044
Izod Impact notched, 1/8 in 1110 / 1320 J/m ASTM D 256
Thermal propertiesdry / condUnitTest Standard
ISO Data
Temp. of deflection under load, 1.80 MPa 58 / * °C ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa 183 / * °C ISO 75-1/-2
ASTM Data
Coefficient of Thermal Expansion, MD 110 E-6/K ASTM D 696
DTUL @ 66 psi 215 °C ASTM D 648
DTUL @ 264 psi 73 °C ASTM D 648
Other propertiesdry / condUnitTest Standard
Humidity absorption 1.7 / * % Sim. to ISO 62
Density 1080 / - kg/m³ ISO 1183
Density 1080 kg/m³ ASTM D 792
Characteristics
Processing
Injection Molding, Wire/Cable Extrusion
Delivery form
Pellets
Special Characteristics
High impact or impact modified, Heat stabilized or stable to heat
Applications
Automotive
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.