Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LUVOSINT X92A-2 - TPU - LEHVOSS Group

Material Data Center offers the following functions for LUVOSINT X92A-2:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Luvosint datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties - 3D Data
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt volume-flow rate, MVR 18 cm³/10min ISO 1133
Temperature 190 °C -
Load 2.16 kg -
Other Standards[S]
Molding shrinkage, parallel 3.0 %
S: These properties are reported by the producer according standards that are different to our defaults.
Mechanical propertiesValueUnitTest Standard
ISO Data
Shore A hardness 88 - ISO 7619-1
Other Standards[S]
Flexural modulus, 23°C 27 MPa ISO 6721-1
Flexural modulus 72 MPa ISO 6721-1
Flexural modulus temperature 60 °C -
S: These properties are reported by the producer according standards that are different to our defaults.
Thermal propertiesValueUnitTest Standard
ISO Data
Melting temperature, 10°C/min 160 °C ISO 11357-1/-3
Vicat softening temperature, A 90 °C ISO 306
Other Standards[S]
Glass transition temperature, 10°C/min -13.6 °C ISO 6721-1
S: These properties are reported by the producer according standards that are different to our defaults.
Other propertiesValueUnitTest Standard
Density 1200 kg/m³ ISO 1183
Bulk density 457 kg/m³ -
3D DataValueUnitTest Standard
Other Standards[S]
Tensile strength, flat 20[1] MPa DIN 53504
Tensile strength, upright 15[2] MPa DIN 53504
Strain at break, flat 520[1] % DIN 53504
Strain at break, upright 500[2] % DIN 53504
1: XY-direction  2: ZX-direction  S: These properties are reported by the producer according standards that are different to our defaults.
Characteristics
Processing
Additive Manufacturing, Laser Sintering
Delivery form
Powder, White
Applications
Sports Equipment
Regional Availability
North America, Europe, Asia Pacific, South and Central America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.