Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NYLENE® 5105 - PA66-GF5 - Polymeric Resources Corporation

Material Data Center offers the following functions for NYLENE® 5105:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Nylene datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ASTM Data
Mold Shrinkage, MD 0.07 mm/mm ASTM D 955
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Strength 74 MPa ISO 527
Flexural modulus, 23°C 2850 MPa ISO 178
Charpy impact strength, +23°C 27 kJ/m² ISO 179/1eU
Thermal propertiesValueUnitTest Standard
ISO Data
Melting temperature, 10°C/min 255 °C ISO 11357-1/-3
Temp. of deflection under load, 1.80 MPa 221 °C ISO 75-1/-2
Other propertiesValueUnitTest Standard
Density 1140 kg/m³ ISO 1183
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 65 - 82 °C -
Pre-drying - Time 2 - 4 h -
Processing humidity ≤0.2 % -
Melt temperature 287 - 316 °C -
Mold temperature 49 - 93 °C -
Zone 1 260 - 293 °C -
Zone 2 277 - 299 °C -
Zone 3 282 - 310 °C -
Nozzle temperature 279 - 307 °C -
Injection pressure 5 - 15 MPa -
Back pressure 0 - 50 MPa -
Holding pressure 4 - 12 MPa -
Maximum residence time 6 min -
Characteristics
Processing
Injection Molding
Additives
Lubricants
Chemical Resistance
General Chemical Resistance
Applications
Automotive, General Purpose
Regional Availability
North America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.