Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Nypel® 6235G BK1 - PA6-GF35 - BASF

Material Data Center offers the following functions for Nypel® 6235G BK1:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Nypel datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Product Texts
Nypel 6235G BK1 is a 35% glass reinforced injection molding grade of PA6. Based on recycled polyamide feedstocks, Nypel 6235G BK1 offers a balance of mechanical properties with excellent flow and surface appearance.

Nypel 6235G BK1 is recommended for lawn and power equipment housings, structural furniture components such as seat frames, and automotive and industrial applications.
Processing/Physical Characteristicsdry / condUnitTest Standard
ISO Data
Melt volume-flow rate, MVR 76 / * cm³/10min ISO 1133
Temperature 275 / * °C -
Load 5 / * kg -
Mechanical propertiesdry / condUnitTest Standard
ISO Data
Tensile Modulus 10999 / 7854 MPa ISO 527
Stress at break 172 / 116 MPa ISO 527
Strain at break 3.2 / 6.2 % ISO 527
Charpy impact strength, +23°C 90 / 104 kJ/m² ISO 179/1eU
Charpy impact strength, -30°C 77 / 75 kJ/m² ISO 179/1eU
Charpy notched impact strength, +23°C 17 / 20 kJ/m² ISO 179/1eA
Charpy notched impact strength, -30°C 14 / 14 kJ/m² ISO 179/1eA
Thermal propertiesdry / condUnitTest Standard
ISO Data
Melting temperature, 10°C/min 218 / * °C ISO 11357-1/-3
Temp. of deflection under load, 1.80 MPa 207 / * °C ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa 217 / * °C ISO 75-1/-2
Other propertiesdry / condUnitTest Standard
Water absorption 1.25 / * % Sim. to ISO 62
Humidity absorption 5.1 / * % Sim. to ISO 62
Density 1380 / - kg/m³ ISO 1183
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 80 °C -
Pre-drying - Time 4 h -
Melt temperature 270 - 290 °C -
Mold temperature 80 - 90 °C -
Characteristics
Processing
Injection Molding
Delivery form
Black
Certifications
Recycled Resin Content
Applications
Automotive
Regional Availability
North America
Other text information
Injection molding
PREPROCESSING
Pre/Post-processing, Pre-drying, Temperature: 80 °C
Pre/Post-processing, Pre-drying, Time: 4 h

PROCESSING
injection molding, Melt temperature, range: 270 - 290 °C
injection molding, Mold temperature, range: 80 - 90 °C
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.