Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Pebax® 2533 SD 02 - TPA - ARKEMA

Check here, which other Pebax datasheets, application examples or technical articles are available in Material Data Center

Mechanical properties - Thermal properties - Electrical properties - Other properties - Diagrams

Any use of this information falls under the rules of our disclaimer.

Product Texts

Polyether block amide Pebax® 2533 SD 02 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide.
This SD grade is heat and UV stabilized and contains mould release additive.


Main applications:

• Flexible injected parts
• Silent gears

Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.

Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services.

Mechanical properties	dry / cond	Unit	Test Standard
ISO Data
Tensile Modulus	12 / 10	MPa	ISO 527
Stress at 50% strain	3 / 3	MPa	ISO 527
Strain at break	>50 / >50	%	ISO 527
Stress at 10% elongation	1 / *	MPa	ISO 527
Stress at 100% elongation	4 / *	MPa	ISO 527
Stress at break TPE	32 / *	MPa	ISO 527
Strain at break TPE	>300 / *	%	ISO 527
Compression set at 23 °C, 24h	19 / *	%	ISO 815
Tear strength	44 / *	kN/m	ISO 34-1
Abrasion resistance	130 / *	mm³	ISO 4649
Shore A hardness	74 / *	-	ISO 7619-1
Shore D hardness	22 / *	-	ISO 7619-1

Thermal properties	dry / cond	Unit	Test Standard
ISO Data
Melting temperature, 10°C/min	134 / *	°C	ISO 11357-1/-3
Glass transition temperature, 10°C/min	-65 / *	°C	ISO 11357-1/-2
Temp. of deflection under load, 0.45 MPa	42 / *	°C	ISO 75-1/-2
Coeff. of linear therm. expansion, parallel	200 / *	E-6/K	ISO 11359-1/-2
Burning Behav. at 1.5 mm nom. thickn.	HB / *	class	IEC 60695-11-10
Thickness tested	1.6 / *	mm	-
Yellow Card available	yes / *	-	-

Electrical properties	dry / cond	Unit	Test Standard
ISO Data
Relative permittivity, 100Hz	6 / -	-	IEC 62631-2-1
Relative permittivity, 1MHz	6 / -	-	IEC 62631-2-1
Dissipation factor, 100Hz	552 / -	E-4	IEC 62631-2-1
Dissipation factor, 1MHz	378 / -	E-4	IEC 62631-2-1
Volume resistivity	1.3E10 / -	Ohm*m	IEC 62631-3-1
Surface resistivity	* / 3E12	Ohm	IEC 62631-3-2
Electric strength	36 / -	kV/mm	IEC 60243-1
Comparative tracking index	* / 600	-	IEC 60112

Other properties	dry / cond	Unit	Test Standard
Water absorption	1.2 / *	%	Sim. to ISO 62
Humidity absorption	0.4 / *	%	Sim. to ISO 62
Density	1000 / 1000	kg/m³	ISO 1183

Diagrams

Characteristics

Processing

Injection Molding, Film Extrusion, Profile Extrusion, Other Extrusion, Transfer Molding, Casting, Thermoforming

Delivery form

Pellets

Additives

Lubricants, Antiblocking agent

Special Characteristics

Platable, Light stabilized or stable to light, U.V. stabilized or stable to weather, Heat stabilized or stable to heat

Regional Availability

North America, Europe, Asia Pacific, South and Central America, Near East/Africa

Other text information

Injection molding

Processing conditions:

- Typical melt temperature (Min / Recommended / Max) : 180°C / 210°C / 240°C.
- Typical mold temperature : 10 – 30°C.
- Drying time and temperature (only necessary for bags opened for more than two hours) : 4-8 hours at 55-65°C.

Chemical Media Resistance

Acids
	Sulfuric Acid (38% by mass) (23°C)
Bases
	Sodium Hydroxide solution (1% by mass) (23°C)
Alcohols
	Ethanol (23°C)
Hydrocarbons
	iso-Octane (23°C)
Ketones
	Acetone (23°C)
Salt solutions
	Zinc Chloride solution (50% by mass) (23°C)
Other
	Water (23°C)

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.