Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Pebax® MV 1074 SA 01 MED - TPA - ARKEMA

Material Data Center offers the following functions for Pebax® MV 1074 SA 01 MED:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Pebax datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Mechanical properties - Thermal properties - Electrical properties - Other properties - Film Properties
Any use of this information falls under the rules of our disclaimer.
Product Texts
Polyether block amide Pebax® MV 1074 SA 01 MED resin is a thermoplastic elastomer made of flexible and hydrophilic polyether and rigid polyamide.
Hydrophilic Pebax® MV 1074 SA 01 MED resin is suitable for extrusion or coextrusion and offers excellent high moisture absorption properties in wet environments, enhancing lubricity against bodily tissue.
Pebax® MV 1074 SA 01 MED resin is also an inherently dissipative polymer and can be dry blended or compounded with a polymer matrix to lower the surface resistivity of the final part.
This grade offers the highest quality and it is specially designed to meet the stringent requirements of the medical applications such as minimally invasive devices. Upon request, letters regarding USP Class VI compliance can be provided.

Refractive index according to an internal method is 1.502.

Main applications:
  • Breathable membranes
  • Permanent antistactic additive
  • Surgical tubings and garments


Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.

Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services.
Mechanical propertiesdry / condUnitTest Standard
ISO Data
Tensile Modulus 97 / 80 MPa ISO 527
Stress at 50% strain 10 / 10 MPa ISO 527
Strain at break >50 / >50 % ISO 527
Stress at break TPE 30 / * MPa ISO 527
Strain at break TPE >300 / * % ISO 527
Shore D hardness 38 / * - ISO 7619-1
Thermal propertiesdry / condUnitTest Standard
ISO Data
Melting temperature, 10°C/min 158 / * °C ISO 11357-1/-3
Glass transition temperature, 10°C/min -40 / * °C ISO 11357-1/-2
Oxygen index 19 / * % ISO 4589-1/-2
Electrical propertiesdry / condUnitTest Standard
ISO Data
Volume resistivity 1.5E9 / 2.5E7 Ohm*m IEC 62631-3-1
Surface resistivity * / 3E9 Ohm IEC 62631-3-2
Electric strength 5 / - kV/mm IEC 60243-1
Other propertiesdry / condUnitTest Standard
Humidity absorption 1.4 / * % Sim. to ISO 62
Density 1070 / - kg/m³ ISO 1183
Film Propertiesdry / condUnitTest Standard
ISO Data
Maximum stress, parallel 32 / * MPa ISO 527-3
Maximum stress, normal 34 / * MPa ISO 527-3
Maximum strain, parallel 500 / * % ISO 527-3
Maximum strain, normal 700 / * % ISO 527-3
Characteristics
Processing
Injection Molding, Other Extrusion
Special Characteristics
Anti-static, Light stabilized or stable to light, Heat stabilized or stable to heat
Certifications
Medical Grade, US Pharmacopeia Class VI Approved
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Other text information
Injection molding

Processing conditions:

- Typical melt temperature (Min / Recommended / Max): 200°C / 240°C / 270°C.
- Typical mold temperature: 25–60°C.
- Drying time and temperature (only necessary for bags opened for more than two hours): 4-6 hours at 65-75°C.
Other extrusion

Processing conditions:

- Typical melt temperature (Min / Recommended / Max): 210°C / 220°C / 230°C.
- Drying time and temperature (only necessary for bags opened for more than two hours): 4-6 hours at 65-75°C.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.