Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Platamid® M 1422 Pellets - PA* - ARKEMA

Material Data Center offers the following functions for Platamid® M 1422 Pellets:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Platamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Thermal properties
Any use of this information falls under the rules of our disclaimer.
Product Texts
Platamid® M 1422 Pellets
Copolyamide Hot Melt Adhesive / Extrusion Applications

Platamid® M 1422 Pellets is a standard thermoplastic copolyamide hot melt adhesive available in pellet form and is used in solvent based processes.
Platamid®  M 1422 Pellets is a semi-crystalized copolyamide product which has been developed for use in the wire coating industry.


AVAILABLE GRADES
This product is available:
- undried (M 1422 F)
- undried (M 1422/1 F)
PACKAGING
- Platamid® M 1422 F and M 1422/1 F are delivered in 25 kg sealed bags.
These grades are ready to be processed.
SHELF LIFE
Two years from the date of delivery. For any use above this limit, please refer to our technical services.

Processing/Physical Characteristicsdry / condUnitTest Standard
ISO Data
Melt volume-flow rate, MVR 30 / * cm³/10min ISO 1133
Temperature 230 / * °C -
Load 2.16 / * kg -
Thermal propertiesdry / condUnitTest Standard
ISO Data
Melting temperature, 10°C/min 120 / * °C ISO 11357-1/-3
Characteristics
Processing
Film Extrusion, Coating
Delivery form
Pellets
Features
Copolymer
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.