Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Platamid® M 1943 Pellets - PA* - ARKEMA

Material Data Center offers the following functions for Platamid® M 1943 Pellets:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Platamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Thermal properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Product Texts
Platamid® M 1943 Pellets

Copolyamide Hot Melt Adhesive /Extrusion Applications

 

Platamid® M 1943 Pellets is a standard thermoplastic copolyamide hot melt adhesive available in pellet form. This medium melt viscosity, low re-crystallizing grade, is particularly suitable for manufacturing webs, nets, mono- and multi-filaments and films by extrusion.

Platamid® M 1943 Pellets offer very good adhesion to various polar substrates (thermoplastics, thermosets, metal, natural fibers, etc).



AVAILABLE GRADES

This grade is available:

- dried with optical brightener (M 1943 TA)

PACKAGING

Platamid® M 1943  is delivered in 25 kg sealed bags.

This grade are ready to be processed

SHELFLIFE

Two years from the date of delivery. For any use above this limit, please refer to our technical services.

RENEWABLE CARBON CONTENT : 26 % (Internal method)

Processing/Physical Characteristicsdry / condUnitTest Standard
ISO Data
Melt volume-flow rate, MVR 10 / * cm³/10min ISO 1133
Temperature 160 / * °C -
Load 2.16 / * kg -
Thermal propertiesdry / condUnitTest Standard
ISO Data
Melting temperature, 10°C/min 122 / * °C ISO 11357-1/-3
Other propertiesValueUnitTest Standard
Biobased content 26 % -
Characteristics
Processing
Film Extrusion
Delivery form
Pellets
Features
Good Adhesion, Copolymer
Certifications
Contains renewable resources
Applications
Monofilament, Multifilament
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.