View Datasheet in other language

E-mail to a friend

Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of RamOfin PPC711 - PP - Polyram

Material Data Center offers the following functions for RamOfin PPC711:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ramofin datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:

Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties

Any use of this information falls under the rules of our disclaimer.

Processing/Physical Characteristics

Value

Unit

Test Standard

ISO Data

Melt flow index, MFI

g/10min

ISO 1133

Temperature

230

°C

Load

2.16

Molding shrinkage, parallel

1.9

ISO 294-4, 2577

Mechanical properties

Value

Unit

Test Standard

ISO Data

Yield stress

MPa

ISO 527

Strain at break

ISO 527

Flexural modulus, 23°C

1350

MPa

ISO 178

Izod notched impact strength, +23°C

kJ/m²

ISO 180/1A

Rockwell hardness

R 80

ISO 2039-2

Thermal properties

Value

Unit

Test Standard

ISO Data

Temp. of deflection under load, 1.80 MPa

°C

ISO 75-1/-2

Electrical properties

Value

Unit

Test Standard

ISO Data

Relative permittivity, 1MHz

2.3

IEC 62631-2-1

Volume resistivity

>1E13

Ohm*m

IEC 62631-3-1

Surface resistivity

1E14

Ohm

IEC 62631-3-2

Electric strength

500

kV/mm

IEC 60243-1

Other properties	Value	Unit	Test Standard
Water absorption	0.03	%	Sim. to ISO 62
Density	900	kg/m³	ISO 1183

Characteristics

Processing

Injection Molding

Special Characteristics

U.V. stabilized or stable to weather

Features

Copolymer

Regional Availability

North America, Europe, Asia Pacific, South and Central America, Near East/Africa

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.