Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of RamOfin PPH305G6BK11 - PP-GF30 - Polyram

Material Data Center offers the following functions for RamOfin PPH305G6BK11:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ramofin datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt flow index, MFI 6 g/10min ISO 1133
Temperature 230 °C -
Load 2.16 kg -
Other Standards[S]
Molding shrinkage, parallel 0.3 % Producer Method
Molding shrinkage, normal 0.8 % Producer Method
S: These properties are reported by the producer according standards that are different to our defaults.
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 6300 MPa ISO 527
Tensile Strength 80 MPa ISO 527
Strain at break 4 % ISO 527
Flexural modulus, 23°C 5800 MPa ISO 178
Flexural strength 151 MPa ISO 178
Charpy impact strength, +23°C 46 kJ/m² ISO 179/1eU
Charpy impact strength, -30°C 44 kJ/m² ISO 179/1eU
Charpy notched impact strength, +23°C 9.5 kJ/m² ISO 179/1eA
Charpy notched impact strength, -30°C 7.5 kJ/m² ISO 179/1eA
Izod notched impact strength, +23°C 10.5 kJ/m² ISO 180/1A
Izod notched impact strength 8.5 kJ/m² ISO 180/1A
Temperature -30 °C -
Thermal propertiesValueUnitTest Standard
ISO Data
Temp. of deflection under load, 1.80 MPa 140 °C ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa 155 °C ISO 75-1/-2
Burning rate, FMVSS, Thickness 1 mm 80 mm/min ISO 3795 (FMVSS 302)
Electrical propertiesValueUnitTest Standard
Other Standards[S]
Surface resistivity 12 Ohm DIN 53482
S: These properties are reported by the producer according standards that are different to our defaults.
Other propertiesValueUnitTest Standard
Density 1140 kg/m³ ISO 1183
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 80 °C -
Pre-drying - Time 2 - 4 h -
Processing humidity ≤0.1 % -
Mold temperature 30 - 70 °C -
Feed temperature 60 - 70 °C -
Zone 1 200 - 230 °C -
Zone 2 200 - 230 °C -
Zone 3 200 - 250 °C -
Characteristics
Processing
Injection Molding
Delivery form
Black
Special Characteristics
U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Features
Homopolymer
Applications
Automotive
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.