Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of RamTough RZ720 - PC - Polyram

Material Data Center offers the following functions for RamTough RZ720:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ramtough datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt flow index, MFI 15 g/10min ISO 1133
Temperature 300 °C -
Load 1.2 kg -
Molding shrinkage, parallel 0.6 % ISO 294-4, 2577
Mechanical propertiesValueUnitTest Standard
ISO Data
Yield stress 60 MPa ISO 527
Strain at break 95 % ISO 527
Flexural modulus, 23°C 220 MPa ISO 178
Izod notched impact strength, +23°C 50 kJ/m² ISO 180/1A
ASTM Data
Flexural Strength 90 MPa ASTM D 790
Thermal propertiesValueUnitTest Standard
ISO Data
Temp. of deflection under load, 1.80 MPa 120 °C ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa 130 °C ISO 75-1/-2
Burning behav. at thickness h V-2 class IEC 60695-11-10
Thickness tested 3.0 mm -
ASTM Data
Vicat Temperature 145 °C ASTM D 1525
Other propertiesValueUnitTest Standard
Density 1200 kg/m³ ISO 1183
Characteristics
Processing
Injection Molding
Special Characteristics
High impact or impact modified, U.V. stabilized or stable to weather
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.