Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Rilsan® BESN BLACK P126 T6L - PA11 - ARKEMA

Material Data Center offers the following functions for Rilsan® BESN BLACK P126 T6L:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Rilsan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Mechanical properties - Thermal properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Product Texts
Rilsan® BESN BLACK P126 T6L resin is a flexible polyamide 11 produced from a renewable source. This  grade is designed for tube extrusion and has a high thermo-oxidative resistance.

The material described in this document is a development grade. This product is not fully industrialized and has not reach full commercial status. As a consequence Arkema reserve the right to change the material specification or change the composition or optimize the process or suppress the material at any time without notice.



Main applications:
  • Fluid transportation
  • Tubing for use in motor vehicle

Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.

Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services.
Mechanical propertiesdry / condUnitTest Standard
ISO Data
Tensile Modulus - / 800 MPa ISO 527
Thermal propertiesdry / condUnitTest Standard
ISO Data
Melting temperature, 10°C/min 189 / * °C ISO 11357-1/-3
Other propertiesdry / condUnitTest Standard
Density 1010 / 1010 kg/m³ ISO 1183
Biobased content 75 % -
Characteristics
Processing
Profile Extrusion, Other Extrusion
Delivery form
Pellets, Black
Special Characteristics
Light stabilized or stable to light, U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Certifications
Contains renewable resources
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Other text information
Other extrusion

Processing conditions:

- Typical melt temperature (Min / Recommended / Max) : 230°C / 250°C / 300°C.

- Drying time and temperature (only necessary for bags opened for more than two hours) : 4-8 hours at 80°C.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.