Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Rilsan® ROTO 11 NATURAL - PA11 - ARKEMA

Material Data Center offers the following functions for Rilsan® ROTO 11 NATURAL:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Rilsan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Mechanical properties - Thermal properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Product Texts

PA11-P,RDHL,C12-010


Rilsan® ROTO 11 NATURAL resin is a polyamide 11 powder produced from a renewable source. This natural grade is designed for Rotomolding.

 



ARM Impact Strength:
73 °F    140 ft-lbs
 -40 °F    60 ft-lbs

Mechanical properties:
Testing was performed on rotational molded test specimens.

Main applications:
Rotational molding - Rotomolded tanks.

Packaging:
This grade is delivered in 100 lb drums ready to be processed.




Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services.
Mechanical propertiesdry / condUnitTest Standard
ISO Data
Tensile Modulus 965 / - MPa ISO 527
Yield stress 43 / - MPa ISO 527
Yield strain 31 / - % ISO 527
Nominal strain at break >50 / - % ISO 527
Charpy notched impact strength, +23°C 7.5 / - kJ/m² ISO 179/1eA
Thermal propertiesdry / condUnitTest Standard
ISO Data
Melting temperature, 10°C/min 185 / * °C ISO 11357-1/-3
Other propertiesdry / condUnitTest Standard
Density 1050 / 1050 kg/m³ ISO 1183
Characteristics
Processing
Rotational Molding
Delivery form
Powder, Natural Color
Additives
Plasticizer
Special Characteristics
Light stabilized or stable to light, Heat stabilized or stable to heat
Certifications
Contains renewable resources
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.