Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Rilsan® TIEFLEX S442 NAT TL - PA* - ARKEMA

Material Data Center offers the following functions for Rilsan® TIEFLEX S442 NAT TL:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Rilsan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Product Texts
Rilsan ® TIEFLEX S442 NAT TL resin is a flexible tie layer alloy partially based on renewable resources. This grade is designed for multilayer automotive and trucks fuel lines (tie layer for fuel line).

Packaging:
This grade is delivered dried in sealed packaging (25kg bags) ready to be processed.

Shelf life:
Two years from the date of delivery. For any use above this limit, please refer to our technical services.
Processing/Physical Characteristicsdry / condUnitTest Standard
ISO Data
Melt volume-flow rate, MVR 4.6 / * cm³/10min ISO 1133
Temperature 235 / * °C -
Load 5 / * kg -
Mechanical propertiesdry / condUnitTest Standard
ISO Data
Tensile Modulus - / 600 MPa ISO 527
Yield stress - / 31 MPa ISO 527
Yield strain - / 40 % ISO 527
Nominal strain at break - / >50 % ISO 527
Thermal propertiesdry / condUnitTest Standard
ISO Data
Melting temperature, 10°C/min 217 / * °C ISO 11357-1/-3
Other propertiesdry / condUnitTest Standard
Density 1060 / - kg/m³ ISO 1183
Characteristics
Processing
Other Extrusion
Delivery form
Pellets, Natural Color
Certifications
Contains renewable resources
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Other text information
Other extrusion
Processing conditions
- Typical melt temperature (min / recommended / max): 220°C / 230°C / 240°C
- Drying time and temperature (only necessary for bags opened for more than two hours): 4-6 hours at 80°C
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.