Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SCHULAMID® 66 GBF 3020 FR 4 - PA66-(GB+GF)30 - LyondellBasell Industries

Check here, which other Schulamid datasheets, application examples or technical articles are available in Material Data Center

Mechanical properties - Thermal properties - Electrical properties - Other properties - Processing Recommendation Injection Molding - Diagrams

Any use of this information falls under the rules of our disclaimer.

Product Texts

20% glass fibre and 10% glass bead reinforced flame retardant PA 66 with high mechanical strength and dimensional stability

*) only for black colour

Mechanical properties	dry / cond	Unit	Test Standard
ISO Data
Tensile Modulus	8700 / 5000	MPa	ISO 527
Stress at break	140 / 92	MPa	ISO 527
Strain at break	2.5 / 4.5	%	ISO 527
Charpy impact strength, +23°C	42 / 51	kJ/m²	ISO 179/1eU
Charpy impact strength, -30°C	38 / -	kJ/m²	ISO 179/1eU
Charpy notched impact strength, +23°C	5.5 / 7	kJ/m²	ISO 179/1eA
Charpy notched impact strength, -30°C	4.5 / -	kJ/m²	ISO 179/1eA

Thermal properties	dry / cond	Unit	Test Standard
ISO Data
Temp. of deflection under load, 1.80 MPa	224 / *	°C	ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa	250 / *	°C	ISO 75-1/-2
Burning Behav. at 1.5 mm nom. thickn.	V-0 / *	class	IEC 60695-11-10
Thickness tested	1.5 / *	mm	-
Yellow Card available	yes / *	-	-
Burning Behav. at thickness h	V-0 / *	class	IEC 60695-11-10
Thickness tested	3.0 / *	mm	-
Yellow Card available	yes / *	-	-
Oxygen index	38 / *	%	ISO 4589-1/-2

Electrical properties	dry / cond	Unit	Test Standard
ISO Data
Relative permittivity, 100Hz	4.81 / -	-	IEC 62631-2-1
Relative permittivity, 1MHz	3.85 / -	-	IEC 62631-2-1
Volume resistivity	1E11 / -	Ohm*m	IEC 62631-3-1
Surface resistivity	* / 7.8E12	Ohm	IEC 62631-3-2
Electric strength	22 / -	kV/mm	IEC 60243-1
Comparative tracking index	175 / -	-	IEC 60112

Other properties	dry / cond	Unit	Test Standard
Density	1590 / -	kg/m³	ISO 1183

Processing Recommendation Injection Molding	Value	Unit	Test Standard
Pre-drying - Temperature	80	°C	-
Pre-drying - Time	4 - 6	h	-
Melt temperature	280 - 300	°C	-
Mold temperature	60 - 100	°C	-

Diagrams

Characteristics

Processing

Injection Molding

Delivery form

Granules

Additives

Release agent

Special Characteristics

Flame retardant

Regional Availability

North America, Europe, Asia Pacific, South and Central America, Near East/Africa

Other text information

Injection molding

PREPROCESSING; Pretreatment
Predrying: 4-6h / 80°C

PROCESSING ;Processing:

Melttemperature	280 - 300	°C
Mouldtemperature	60 - 100	°C

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.