Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Stat-Tech™ NN-20GF-15MCF/000 HS - PA66-(GF+CF)35 - Avient Corporation

Material Data Center offers the following functions for Stat-Tech™ NN-20GF-15MCF/000 HS:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Stat-Tech datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ASTM Data
Mold Shrinkage, MD 0.0025 mm/mm ASTM D 955
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 15500 MPa ISO 527
Stress at break 185 MPa ISO 527
Strain at break 1.5 % ISO 527
Charpy impact strength, +23°C 50.5 kJ/m² ISO 179/1eU
Charpy notched impact strength, +23°C 8.25 kJ/m² ISO 179/1eA
Thermal propertiesValueUnitTest Standard
ASTM Data
DTUL @ 66 psi 261 °C ASTM D 648
DTUL @ 264 psi 250 °C ASTM D 648
Electrical propertiesValueUnitTest Standard
ASTM Data
Surface Resistivity 10000 Ohm ASTM D 257
Volume Resistivity 10000 Ohm*cm ASTM D 257
Other propertiesValueUnitTest Standard
Density 1370 kg/m³ ISO 1183
Processing Recommendation Injection MoldingValueUnitTest Standard
Melt temperature 280 - 300 °C -
Characteristics
Processing
Injection Molding
Delivery form
Pellets
Special Characteristics
Increased electrical conductivity, Heat stabilized or stable to heat
Chemical Resistance
General Chemical Resistance
Applications
Aircraft and Aerospace, Automotive, IT / Business Machine, Electrical and Electronical, Encapsulation, Sports Equipment
Regional Availability
Europe
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.