Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Styroflex® 2G66 LE - SB - INEOS Styrolution

Material Data Center offers the following functions for Styroflex® 2G66 LE:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Styroflex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Optical properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt volume-flow rate, MVR 13 cm³/10min ISO 1133
Temperature 200 °C -
Load 5 kg -
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 120 MPa ISO 527
Yield stress 4 MPa ISO 527
Yield strain 5 % ISO 527
Flexural modulus, 23°C 140 MPa ISO 178
Flexural strength 4 MPa ISO 178
Charpy notched impact strength, -30°C 2 kJ/m² ISO 179/1eA
Shore A hardness 84 - ISO 7619-1
Shore D hardness 34 - ISO 7619-1
Thermal propertiesValueUnitTest Standard
ASTM Data
Vicat Temperature 35 °C ASTM D 1525
Electrical propertiesValueUnitTest Standard
ISO Data
Volume resistivity 1E13 Ohm*m IEC 62631-3-1
Surface resistivity 1E15 Ohm IEC 62631-3-2
Optical propertiesValueUnitTest Standard
ASTM Data
Haze 5 % ASTM D 1003
Light Transmittance 80 % ASTM D 1003
Other propertiesValueUnitTest Standard
Water absorption 0.07 % Sim. to ISO 62
Density 998 kg/m³ ISO 1183
Characteristics
Processing
Injection Molding, Other Extrusion
Special Characteristics
Transparent
Features
Copolymer
Certifications
Food contact
Applications
Medical, Packaging
Regional Availability
Europe, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.