Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Tecolen® HP10 GR30 NL HS - PP-GF30 - Eurotec Mühendislik Plastikleri

Material Data Center offers the following functions for Tecolen® HP10 GR30 NL HS:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Tecolen datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Mechanical properties - Thermal properties - Electrical properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 6250 MPa ISO 527
Stress at break 90 MPa ISO 527
Strain at break 3 % ISO 527
Izod notched impact strength, +23°C 14 kJ/m² ISO 180/1A
Thermal propertiesValueUnitTest Standard
ISO Data
Melting temperature, 10°C/min 168 °C ISO 11357-1/-3
Temp. of deflection under load, 1.80 MPa 155 °C ISO 75-1/-2
Burning behav. at 1.5 mm nom. thickn. HB class IEC 60695-11-10
Thickness tested 1.6 mm -
Burning behav. at thickness h HB class IEC 60695-11-10
Thickness tested 0.8 mm -
Electrical propertiesValueUnitTest Standard
ISO Data
Volume resistivity 1E13 Ohm*m IEC 62631-3-1
Surface resistivity 1E15 Ohm IEC 62631-3-2
Other propertiesValueUnitTest Standard
Density 1110 kg/m³ ISO 1183
Processing Recommendation Injection MoldingValueUnitTest Standard
Melt temperature 200 - 240 °C -
Mold temperature 20 - 50 °C -
Feed temperature ≤60 °C -
Holding pressure 40 - 80 MPa -
Characteristics
Processing
Injection Molding
Delivery form
Natural Color
Special Characteristics
Heat stabilized or stable to heat
Regional Availability
Europe
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.