View Datasheet in other language

E-mail to a friend

Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of TEREZ® HT 100 H G50 W - PA6T/6I-GF50 - Ter Plastics

Material Data Center offers the following functions for TEREZ® HT 100 H G50 W:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Terez datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:

Mechanical properties - Thermal properties - Electrical properties - Other properties - Processing Recommendation Injection Molding

Any use of this information falls under the rules of our disclaimer.

Product Texts

Standard type with medium viscosity partly aromatic

Polyamid with 50% glass fiber content and heat stabilized.

This Product is suitable for drinking water contact.

For all kind of injection mloding parts with high stiffness at

exellence thermal stability, low moisture absorption and which

a drinking water approval is needed.

Mechanical properties

dry / cond

Unit

Test Standard

ISO Data

Tensile Modulus

19000 / 18500

MPa

ISO 527

Stress at break

240 / 220

MPa

ISO 527

Strain at break

1.8 / 1.8

ISO 527

Charpy impact strength, +23°C

80 / 80

kJ/m²

ISO 179/1eU

Charpy notched impact strength, +23°C

11 / 11

kJ/m²

ISO 179/1eA

Thermal properties

dry / cond

Unit

Test Standard

ISO Data

Melting temperature, 10°C/min

330 / *

°C

ISO 11357-1/-3

Temp. of deflection under load, 1.80 MPa

285 / *

°C

ISO 75-1/-2

Temp. of deflection under load, 0.45 MPa

295 / *

°C

ISO 75-1/-2

Burning behav. at 1.5 mm nom. thickn.

HB / *

class

IEC 60695-11-10

Thickness tested

1.6 / *

Electrical properties

dry / cond

Unit

Test Standard

ISO Data

Electric strength

30 / -

kV/mm

IEC 60243-1

Comparative tracking index

550 / -

IEC 60112

Other properties	dry / cond	Unit	Test Standard
Water absorption	3 / *	%	Sim. to ISO 62
Humidity absorption	1.3 / *	%	Sim. to ISO 62
Density	1630 / -	kg/m³	ISO 1183

Processing Recommendation Injection Molding	Value	Unit	Test Standard
Pre-drying - Temperature	80	°C	-
Pre-drying - Time	4 - 12	h	-
Processing humidity	≤0.1	%	-
Mold temperature	140 - 160	°C	-
Feed temperature	60 - 80	°C	-
Zone 1	330 - 340	°C	-
Nozzle temperature	335 - 350	°C	-
Maximum residence time	8	min	-

Characteristics

Processing

Injection Molding

Delivery form

Pellets

Special Characteristics

Heat stabilized or stable to heat

Certifications

Drinking water contact, Drinking water contact KTW

Regional Availability

Europe

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.