Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of THERMOLAST® R RC5OGG-NTRL - TPE - KRAIBURG TPE GmbH & Co. KG

Material Data Center offers the following functions for THERMOLAST® R RC5OGG-NTRL:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Thermolast datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Mechanical properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Product Texts
Recycled raw materials content: 17 %
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Strength 6 MPa ISO 37
Strain at break 650 % ISO 37
Tear strength 10.5 kN/m ISO 34-1
Shore A hardness 50 - ISO 7619-1
Other propertiesValueUnitTest Standard
Density 885 kg/m³ ISO 1183
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 60 - 80 °C -
Pre-drying - Time 2 - 4 h -
Melt temperature 200 - 250 °C -
Mold temperature 25 - 40 °C -
Zone 1 180 °C -
Zone 2 200 °C -
Zone 3 220 °C -
Injection pressure 20 - 100 MPa -
Back pressure 2 - 10 MPa -
Holding pressure 8 - 60 MPa -
Maximum residence time 10 min -
Characteristics
Processing
Injection Molding
Delivery form
Pellets, Natural Color
Features
Good Adhesion
Certifications
Recycled Resin Content
Regional Availability
North America, Europe, Asia Pacific
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.