Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of TIPELIN FS 340-03 - (PE-MD) - MOL Petrochemicals Co. Ltd.

Material Data Center offers the following functions for TIPELIN FS 340-03:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Tipelin datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties - Film Properties - Processing Recommendation Extrusion
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt flow index, MFI 0.17 g/10min ISO 1133
Temperature 190 °C -
Load 2.16 kg -
Mechanical propertiesValueUnitTest Standard
ISO Data
Shore D hardness 60 - ISO 7619-1
Thermal propertiesValueUnitTest Standard
ISO Data
Vicat softening temperature, A 118 °C ISO 306
Other propertiesValueUnitTest Standard
Density 935 kg/m³ ISO 1183
Film PropertiesValueUnitTest Standard
ISO Data
Stress at yield, parallel 25 MPa ISO 527-3
Stress at yield, normal 18 MPa ISO 527-3
Stress at break, parallel 51 MPa ISO 527-3
Stress at break, normal 40 MPa ISO 527-3
Maximum strain, parallel 700 % ISO 527-3
Maximum strain, normal 800 % ISO 527-3
Elmendorf Tear resistance, parallel 0.53 N ISO 6383-2
Elmendorf Tear resistance, normal 3.6 N ISO 6383-2
Dart drop A 95 g ISO 7765-1
Type of extrusion blown - -
Thickness of specimen 0.025 mm -
Processing Recommendation ExtrusionValueUnitTest Standard
Type of extrusion blown - -
Melt temperature 180 - 220 °C -
Characteristics
Processing
Blown Film Extrusion, Film Extrusion
Delivery form
Pellets
Features
Blending Resin, Copolymer, Hexene Copolymer
Chemical Resistance
Acid Resistance, Oxidation Resistance
Certifications
Food contact, Food approval 1935/2004/EC, Food approval 10/2011, Food approval FDA 21 CFR, RoHS compliant
Applications
Electrical and Electronical, Medical, Packaging
Regional Availability
Europe
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.