Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Titalon 3150CF - PA12-CF15 - Titan Plastics Compounds Co., Ltd.

Material Data Center offers the following functions for Titalon 3150CF:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Titalon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Mechanical properties - Thermal properties - Electrical properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Strength 100 MPa ISO 527
Flexural modulus, 23°C 7200 MPa ISO 178
Flexural strength 140 MPa ISO 178
Charpy notched impact strength, +23°C 12 kJ/m² ISO 179/1eA
Thermal propertiesValueUnitTest Standard
ISO Data
Temp. of deflection under load, 1.80 MPa 140 °C ISO 75-1/-2
Burning behav. at thickness h HB class IEC 60695-11-10
Electrical propertiesValueUnitTest Standard
ISO Data
Volume resistivity 1000 Ohm*m IEC 62631-3-1
Surface resistivity 10000 Ohm IEC 62631-3-2
Other propertiesValueUnitTest Standard
Density 1090 kg/m³ ISO 1183
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 80 - 100 °C -
Pre-drying - Time 4 h -
Melt temperature 200 - 230 °C -
Mold temperature 60 - 100 °C -
Characteristics
Processing
Injection Molding
Delivery form
Black
Special Characteristics
Increased electrical conductivity
Regional Availability
Asia Pacific
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.