Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Topas® 5013F-04 - COC - Topas Advanced Polymers

Material Data Center offers the following functions for Topas® 5013F-04:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Topas datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Thermal properties - Optical properties - Other properties - Film Properties - Processing Recommendation Extrusion
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt volume-flow rate, MVR 9 cm³/10min ISO 1133
Temperature 230 °C -
Load 2.16 kg -
Thermal propertiesValueUnitTest Standard
ISO Data
Glass transition temperature, 10°C/min 134 °C ISO 11357-1/-2
Optical propertiesValueUnitTest Standard
ISO Data
Gloss, 60° 100 - ISO 2813
Haze 1 - ISO 14782
Other propertiesValueUnitTest Standard
Density 1020 kg/m³ ISO 1183
Film PropertiesValueUnitTest Standard
ISO Data
Tensile Modulus, parallel 2600 MPa ISO 527-3
Tensile Modulus, normal 2500 MPa ISO 527-3
Stress at break, parallel 35 MPa ISO 527-3
Stress at break, normal 25 MPa ISO 527-3
Maximum strain, parallel 1.4 % ISO 527-3
Maximum strain, normal 1.1 % ISO 527-3
Type of extrusion cast - -
Thickness of specimen 0.07 mm -
Processing Recommendation ExtrusionValueUnitTest Standard
Type of extrusion film - -
Feed temperature 20 - 70 °C -
Zone 1 220 - 240 °C -
Zone 2 220 - 240 °C -
Zone 3 220 - 240 °C -
Zone 4 220 - 240 °C -
Nozzle temperature 220 - 240 °C -
Characteristics
Processing
Film Extrusion, Other Extrusion, Thermoforming
Special Characteristics
Heat stabilized or stable to heat
Features
Barrier Properties, Blending Resin
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.