Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Topas® 5013S-04 - COC - Topas Advanced Polymers

Material Data Center offers the following functions for Topas® 5013S-04:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Topas datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Optical properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt volume-flow rate, MVR 48 cm³/10min ISO 1133
Temperature 260 °C -
Load 2.16 kg -
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 3200 MPa ISO 527
Stress at break 46 MPa ISO 527
Strain at break 1.7 % ISO 527
Charpy impact strength, +23°C 13 kJ/m² ISO 179/1eU
Charpy notched impact strength, +23°C 1.6 kJ/m² ISO 179/1eA
Thermal propertiesValueUnitTest Standard
ISO Data
Glass transition temperature, 10°C/min 134 °C ISO 11357-1/-2
Temp. of deflection under load, 0.45 MPa 127 °C ISO 75-1/-2
Vicat softening temperature, B 133 °C ISO 306
Burning behav. at 1.5 mm nom. thickn. HB class IEC 60695-11-10
Thickness tested 1.6 mm -
Electrical propertiesValueUnitTest Standard
ISO Data
Volume resistivity 1E14 Ohm*m IEC 62631-3-1
Comparative tracking index 600 - IEC 60112
Optical propertiesValueUnitTest Standard
ISO Data
Luminous transmittance 91 % ISO 13468-1, -2
Other propertiesValueUnitTest Standard
Water absorption 0.01 % Sim. to ISO 62
Density 1020 kg/m³ ISO 1183
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 100 °C -
Pre-drying - Time 6 h -
Melt temperature 240 - 300 °C -
Mold temperature 95 - 125 °C -
Feed temperature <100 °C -
Zone 1 230 - 260 °C -
Zone 2 240 - 270 °C -
Zone 3 250 - 280 °C -
Zone 4 260 - 290 °C -
Nozzle temperature 240 - 300 °C -
Screw speed 50 - 200 rpm -
Injection speed 50 - 150 mm/s -
Injection pressure 50 - 110 MPa -
Back pressure ≤15 MPa -
Holding pressure 30 - 60 MPa -
Maximum residence time <15 min -
Characteristics
Processing
Injection Molding
Special Characteristics
Transparent
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.