Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of TROGAMID® CX9710 NC - PAPACM12 - Evonik Operations GmbH

Check here, which other Trogamid datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties

Any use of this information falls under the rules of our disclaimer.

Product Texts

Medium-viscosity and transparent polyamide for injection molding with release agent

TROGAMID® CX9710 is a medium-viscosity and transparent polyamide for injection molding for the manufacture of parts in the optical industry.

The material absorbs only small amounts of water. Components made from this material therefore show excellent dimensional stability under changing ambient humidity as well as consistent UV-stability and chemical resistance. 

TROGAMID® CX9710 is supplied as spherical pellets in moisture-proof packaging.

Pigmentation may affect values.

For information about processing of TROGAMID®, please follow the general commendations about “Processing of TROGAMID® compounds”. 

FOR FURTHER INFORMATION PLEASE CONTACT US AT EVONIK-HP@EVONIK.COM
OR VISIT OUR PRODUCT AT  WWW.TROGAMID.COM

Processing/Physical Characteristics	dry / cond	Unit	Test Standard
ISO Data
Melt volume-flow rate, MVR	20 / *	cm³/10min	ISO 1133
Temperature	285 / *	°C	-
Load	5 / *	kg	-
Molding shrinkage, parallel	0.7 / *	%	ISO 294-4, 2577
Molding shrinkage, normal	0.8 / *	%	ISO 294-4, 2577

Mechanical properties	dry / cond	Unit	Test Standard
ISO Data
Tensile Modulus	1400 / -	MPa	ISO 527
Yield stress	60 / -	MPa	ISO 527
Yield strain	8 / -	%	ISO 527
Nominal strain at break	>50 / -	%	ISO 527
Tensile creep modulus, 1h	* / 1400	MPa	ISO 899-1
Tensile creep modulus, 1000h	* / 700	MPa	ISO 899-1
Charpy impact strength, +23°C	N / -	kJ/m²	ISO 179/1eU
Charpy impact strength, -30°C	N / -	kJ/m²	ISO 179/1eU
Charpy notched impact strength, +23°C	11 / 10.5	kJ/m²	ISO 179/1eA
Type of failure	C / C	-	-
Charpy notched impact strength, -30°C	13 / -	kJ/m²	ISO 179/1eA
Type of failure	C / -	-	-
Shore D hardness	81 / *	-	ISO 7619-1

Thermal properties	dry / cond	Unit	Test Standard
ISO Data
Melting temperature, 10°C/min	250 / *	°C	ISO 11357-1/-3
Glass transition temperature, 10°C/min	140 / *	°C	ISO 11357-1/-2
Temp. of deflection under load, 1.80 MPa	108 / *	°C	ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa	122 / *	°C	ISO 75-1/-2
Vicat softening temperature, B	130 / *	°C	ISO 306
Coeff. of linear therm. expansion, parallel	90 / *	E-6/K	ISO 11359-1/-2
Coeff. of linear therm. expansion, normal	90 / *	E-6/K	ISO 11359-1/-2
Burning Behav. at 1.5 mm nom. thickn.	HB / *	class	IEC 60695-11-10
Thickness tested	1.6 / *	mm	-
Burning Behav. at thickness h	HB / *	class	IEC 60695-11-10
Thickness tested	0.8 / *	mm	-

Electrical properties	dry / cond	Unit	Test Standard
ISO Data
Relative permittivity, 100Hz	3.6 / -	-	IEC 62631-2-1
Relative permittivity, 1MHz	3.2 / -	-	IEC 62631-2-1
Dissipation factor, 100Hz	120 / -	E-4	IEC 62631-2-1
Dissipation factor, 1MHz	325 / -	E-4	IEC 62631-2-1
Surface resistivity	* / 1E13	Ohm	IEC 62631-3-2
Comparative tracking index	600 / -	-	IEC 60112

Other properties	dry / cond	Unit	Test Standard
Water absorption	3.5 / *	%	Sim. to ISO 62
Humidity absorption	1.5 / *	%	Sim. to ISO 62
Density	1020 / -	kg/m³	ISO 1183

Characteristics

Processing

Injection Molding, Film Extrusion, Profile Extrusion, Sheet Extrusion, Other Extrusion, Blow Molding, Thermoforming

Delivery form

Pellets, Natural Color

Additives

Release agent

Special Characteristics

Light stabilized or stable to light, U.V. stabilized or stable to weather, Transparent

Chemical Resistance

General Chemical Resistance

Regional Availability

North America, Europe, Asia Pacific, South and Central America, Near East/Africa

Chemical Media Resistance

Acids
	Sulfuric Acid (38% by mass) (23°C)
Alcohols
	Isopropyl alcohol (23°C)
	Methanol (23°C)
	Ethanol (23°C)
Hydrocarbons
	Toluene (23°C)
Ketones
	Acetone (23°C)
Mineral oils
	SAE 10W40 multigrade motor oil (23°C)
Standard Fuels
	Standard fuel without alcohol (pref. ISO 1817 Liquid C) (23°C)
	Standard fuel with alcohol (pref. ISO 1817 Liquid 4) (23°C)
	Diesel fuel (pref. ISO 1817 Liquid F) (23°C)
Other
	Ethyl Acetate (23°C)

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.