Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ubesta 3030 JFX1 - PA12 - UBE

Material Data Center offers the following functions for Ubesta 3030 JFX1:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ubesta datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt flow index, MFI 7 g/10min ISO 1133
Temperature 235 °C -
Load 2.16 kg -
Molding shrinkage, parallel 0.9 % ISO 294-4, 2577
Molding shrinkage, normal 1.5 % ISO 294-4, 2577
Mechanical propertiesValueUnitTest Standard
ISO Data
Yield stress 26 MPa ISO 527
Yield strain 24 % ISO 527
Strain at break >50 % ISO 527
Flexural modulus, 23°C 400 MPa ISO 178
Charpy notched impact strength, +23°C 120[P] kJ/m² ISO 179/1eA
Shore D hardness 70 - ISO 7619-1
Rockwell hardness R 62 - ISO 2039-2
P: 
Thermal propertiesValueUnitTest Standard
ISO Data
Melting temperature, 10°C/min 171 °C ISO 11357-1/-3
Temp. of deflection under load, 1.80 MPa 45 °C ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa 80 °C ISO 75-1/-2
Coeff. of linear therm. expansion, parallel 190 E-6/K ISO 11359-1/-2
Electrical propertiesValueUnitTest Standard
ISO Data
Volume resistivity 1E10 Ohm*m IEC 62631-3-1
Other propertiesValueUnitTest Standard
Density 1030 kg/m³ ISO 1183
Characteristics
Processing
Other Extrusion
Delivery form
Natural Color
Additives
Plasticizer
Special Characteristics
U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Regional Availability
North America, Europe
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.