Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ubesta 3035 LU 1 - PA12 - UBE

Material Data Center offers the following functions for Ubesta 3035 LU 1:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ubesta datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt flow index, MFI 1 g/10min ISO 1133
Temperature 235 °C -
Load 2.16 kg -
Molding shrinkage, parallel 0.7 % ISO 294-4, 2577
Molding shrinkage, normal 1.5 % ISO 294-4, 2577
ASTM Data
Melt Flow Index, MFI 1.3 g/10min ASTM D 1238
Temperature 235 °C -
Load 2.16 kg -
Mechanical propertiesValueUnitTest Standard
ISO Data
Yield stress 50 MPa ISO 527
Yield strain 4 % ISO 527
Strain at break >50 % ISO 527
Flexural modulus, 23°C 1500 MPa ISO 178
Charpy notched impact strength, +23°C 20 kJ/m² ISO 179/1eA
Shore D hardness 79 - ISO 7619-1
Rockwell hardness R 107 - ISO 2039-2
ASTM Data
Tensile Strength at Yield 46 MPa ASTM D 638
Tensile Strength at Break 56 MPa ASTM D 638
Elongation at Break 250 % ASTM D 638
Flexural Modulus 1590 MPa ASTM D 790
Flexural Strength 61 MPa ASTM D 790
Rockwell Hardness R 112 - ASTM D 785
Izod Impact notched, 1/8 in 86.5 J/m ASTM D 256
Thermal propertiesValueUnitTest Standard
ISO Data
Melting temperature, 10°C/min 178 °C ISO 11357-1/-3
Temp. of deflection under load, 1.80 MPa 45 °C ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa 105 °C ISO 75-1/-2
Coeff. of linear therm. expansion, parallel 120 E-6/K ISO 11359-1/-2
ASTM Data
DTUL @ 66 psi 149 °C ASTM D 648
Melting Temperature 178 °C ASTM D 3418
Electrical propertiesValueUnitTest Standard
ISO Data
Volume resistivity 1E12 Ohm*m IEC 62631-3-1
Other propertiesValueUnitTest Standard
Density 1020 kg/m³ ISO 1183
Density 1020 kg/m³ ASTM D 792
Characteristics
Processing
Other Extrusion, Coating
Delivery form
Black
Special Characteristics
Heat stabilized or stable to heat
Regional Availability
North America, Europe
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.