Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultraform® N2320 003 - POM - BASF

Check here, which other Ultraform datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties - Processing Recommendation Injection Molding - Diagrams

Any use of this information falls under the rules of our disclaimer.

Processing/Physical Characteristics	Value	Unit	Test Standard
ISO Data
Melt volume-flow rate, MVR	7.5	cm³/10min	ISO 1133
Temperature	190	°C	-
Load	2.16	kg	-
Molding shrinkage, parallel	2.1	%	ISO 294-4, 2577
Molding shrinkage, normal	2.1	%	ISO 294-4, 2577

Mechanical properties	Value	Unit	Test Standard
ISO Data
Tensile Modulus	2700	MPa	ISO 527
Yield stress	65	MPa	ISO 527
Yield strain	9.4	%	ISO 527
Nominal strain at break	27	%	ISO 527
Tensile creep modulus, 1000h	1400	MPa	ISO 899-1
Charpy impact strength, +23°C	210	kJ/m²	ISO 179/1eU
Charpy impact strength, -30°C	190	kJ/m²	ISO 179/1eU
Charpy notched impact strength, +23°C	6	kJ/m²	ISO 179/1eA
Charpy notched impact strength, -30°C	5.5	kJ/m²	ISO 179/1eA
Izod notched impact strength, +23°C	6	kJ/m²	ISO 180/1A
Izod notched impact strength	5.5	kJ/m²	ISO 180/1A
Temperature	-30	°C	-
Ball indentation hardness	140	MPa	ISO 2039-1

Thermal properties	Value	Unit	Test Standard
ISO Data
Melting temperature, 10°C/min	167	°C	ISO 11357-1/-3
Temp. of deflection under load, 1.80 MPa	100	°C	ISO 75-1/-2
Coeff. of linear therm. expansion, parallel	110	E-6/K	ISO 11359-1/-2
Burning behav. at 1.5 mm nom. thickn.	HB	class	IEC 60695-11-10
Thickness tested	1.6	mm	-

Electrical properties	Value	Unit	Test Standard
ISO Data
Relative permittivity, 1MHz	3.8	-	IEC 62631-2-1
Dissipation factor, 1MHz	50	E-4	IEC 62631-2-1
Volume resistivity	1E13	Ohm*m	IEC 62631-3-1
Surface resistivity	1E13	Ohm	IEC 62631-3-2
Comparative tracking index	600	-	IEC 60112

Other properties	Value	Unit	Test Standard
Water absorption	0.8	%	Sim. to ISO 62
Humidity absorption	0.2	%	Sim. to ISO 62
Density	1400	kg/m³	ISO 1183
Bulk density	850	kg/m³	-

Processing Recommendation Injection Molding	Value	Unit	Test Standard
Melt temperature	190 - 230	°C	-
Mold temperature	60 - 120	°C	-

Diagrams

Characteristics

Processing

Injection Molding

Delivery form

Pellets

Applications

Automotive

Regional Availability

North America, Europe, Asia Pacific, South and Central America, Near East/Africa

Application examples
Curtain hooks
Fastening clips
Gas meter, measuring unit
Office mailing equipment
Power actuator for rearview mirror

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.