Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of UROCHEM -161 Grade - Urea-L - Chemiplastica

Material Data Center offers the following functions for UROCHEM -161 Grade:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Urochem datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Molding shrinkage, parallel 0.7 % ISO 294-4, 2577
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Strength 45 MPa ISO 527
Charpy impact strength, +23°C 5 kJ/m² ISO 179/1eU
Charpy notched impact strength, +23°C 1.1 kJ/m² ISO 179/1eA
Thermal propertiesValueUnitTest Standard
ISO Data
Temp. of deflection under load, 8.00 MPa 90 °C ISO 75-1/-2
Burning behav. at thickness h V-0 class IEC 60695-11-10
ASTM Data
Limiting Oxygen Index 30 % ASTM D 2863
Electrical propertiesValueUnitTest Standard
ISO Data
Volume resistivity 1E9 Ohm*m IEC 62631-3-1
Surface resistivity 1E10 Ohm IEC 62631-3-2
Comparative tracking index 600 - IEC 60112
Other propertiesValueUnitTest Standard
Density 1500 kg/m³ ISO 1183
Characteristics
Processing
Compression Molding
Delivery form
Granules
Additives
Lubricants
Special Characteristics
Flame retardant, U.V. stabilized or stable to weather
Features
Low Odor, Scratch Resistant
Chemical Resistance
General Chemical Resistance, Oil Resistance
Certifications
Contains renewable resources
Applications
Electrical and Electronical
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.