Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Venuz BD 286 - PET - Selenis Portugal, S.A.

Material Data Center offers the following functions for Venuz BD 286:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Venuz datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Thermal properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Thermal propertiesValueUnitTest Standard
Other Standards[S]
Glass Transition Temperature 85 °C ASTM D 3418
S: These properties are reported by the producer according standards that are different to our defaults.
Other propertiesValueUnitTest Standard
Intrinsic Viscosity 0.72 dl/g -
Density 1270 kg/m³ ASTM D 792
Color L 64 - CIE
Color b 1 - CIE
Moisture Content 0.3 % -
Bulk Density 730 kg/m³ -
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 65 °C -
Pre-drying - Time 5 - 6 h -
Processing humidity ≤0.004 % -
Melt temperature 180 - 250 °C -
Characteristics
Processing
Injection Molding, Other Extrusion, Blow Molding
Delivery form
Pellets
Special Characteristics
High impact or impact modified, Transparent
Features
Amorphous, Barrier Properties, Low Odor, Copolymer
Chemical Resistance
General Chemical Resistance
Certifications
Food contact, Food approval 10/2011, Food approval FDA 21 CFR
Applications
Packaging
Regional Availability
North America, Europe, South and Central America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.